Electrical issues

[FlyingGumby]

Had a jumpy tach, and gauges that were incorrect and moved a lot when things were switched on. Checked all grounds from battery to frame to engine to starter to dash to... well you get it. Turned out the starter switch was not fully completing the accessory circuit when turned on. less than 12v across terminals (10.5v as I recall). New switch fixed it for me.

Marty
BDR 870

[MISFIT 1]

Thanks FlyingGumby! I changed the ignition switch last night and now I get 12 volts. Going to look into the alternator next since the gauge should ready 13 ish volts. Never would've thunked it would be the ignition switch

[BDR0572]

hey Misfit I'm having same issue where u get switch at

[MISFIT 1]

Originally Posted by BDR0572

hey Misfit I'm having same issue where u get switch at

I just used a old Cole Hersee switch I had in old inventory at work similar to this https://www.littelfuse.com/products/...-switches.aspx. If you are around 290 and beltway I will give you one.

[FlyingGumby]

Trying this again... clubcobra may not have liked an embedded link.

Hadn't considered a marine switch but it would be a good choice. Currently using a Lucas switch purchased from Triple-C but the post is a bit small. The bezel nut barely covers the hole on carbon dash. Will get a billet bezel plate or install a switch for 7/8 - 1" hole like the Cole Hersee.

[NROTOXIN]

Originally Posted by FlyingGumby

Trying this again... clubcobra may not have liked an embedded link.

Hadn't considered a marine switch but it would be a good choice. Currently using a Lucas switch purchased from Triple-C but the post is a bit small. The bezel nut barely covers the hole on carbon dash. Will get a billet bezel plate or install a switch for 7/8 - 1" hole like the Cole Hersee.

After a certain amount of post, ~5-10, you will then be able to post links and pictures. Welcome aboard!

[FlyingGumby]

@MISFIT 1
Game to try out the switch. Sent you a PM.

[BDR0572]

Originally Posted by MISFIT 1

I just used a old Cole Hersee switch I had in old inventory at work similar to this https://www.littelfuse.com/products/...-switches.aspx. If you are around 290 and beltway I will give you one.

Thanks Bud yea I'm not to far from there ,thanks I have one coming from Speedway it looks almost identical to what's in there ,If that is the cheapest thing I have to buy, I'm good had alternator tested off car shows good, I will reply with info once i have switch to let all know how it fairs Thanks to all who replied ya make owning this ride a joy ..

[MISFIT 1]

Originally Posted by BDR0572

Thanks Bud yea I'm not to far from there ,thanks I have one coming from Speedway it looks almost identical to what's in there ,If that is the cheapest thing I have to buy, I'm good had alternator tested off car shows good, I will reply with info once i have switch to let all know how it fairs Thanks to all who replied ya make owning this ride a joy ..

Let me know how things work out. you can bring the car to my house and we can trace the electrical if you like, I have been looking for the issue for 6 months. Check your grounds, some are under the car and hard to get to without a lift

[BDR0572]

Originally Posted by MISFIT 1

Let me know how things work out. you can bring the car to my house and we can trace the electrical if you like, I have been looking for the issue for 6 months. Check your grounds, some are under the car and hard to get to without a lift

Thanks ,yea i got my switch yesterday installed today and my alt is steady at 14 vdc on gauge and digital i installed to verify (also has usb for my go pro) I go back to work Tuesday be gone for 14 days but get back i can come help run checks if you like . My weekend is tied up with car club show u more than welcome to come walter hall park in league city sat

https://drive.google.com/file/d/1HuK...ew?usp=sharing