08-06-2022, 08:00 AM
|
|
CC Member
|
|
|
Join Date: Dec 2015
Posts: 1,442
|
|
Not Ranked
The problem is most likely inside the Speedo as the mag pickup is sending a PPM (pulse per mile) signal to the gauge. A short, open circuit, failure on the mag pickup or wiring to the gauge will only give a zero reading.
You may want to call VDO (# at the bottom of this setup guide)
http://www.nsifleet.com/pdf/ProgrammableSpeedometer.pdf
Last edited by spdbrake; 08-06-2022 at 08:23 AM..
|
3Likes
Hybrid Mode
