Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   BackDraft Racing --- (http://www.clubcobra.com/forums/backdraft-racing/)
-   -   heat sheild for brakes (http://www.clubcobra.com/forums/backdraft-racing/67979-heat-sheild-brakes.html)

Cashburn 04-28-2006 09:49 AM

Quote:

Originally Posted by JayBar
Cashburn,
Reg has a much simpler way of installing the Wilwood "puller" slave cylinder, you might ask him.

I think he was mounting it to the chassis some how, that is bad since it will contribute to chatter. %/

ChuckG 04-28-2006 01:42 PM

Ed, I would like to purchase one of these from you, please email me gallag138@aol.com

Thanks. Chuck

thunder1 04-28-2006 05:45 PM

In regards to the Heat shield for the Backdraft, I have a few made up and ready to ship.

SkipB 04-28-2006 07:08 PM

Ed,

I would also purchase a heat shield from you when you return. Please let me know how much and where to mail my check. Either respond here, or e-mail me at: jbrindl1@san.rr.com

Thanks,

SkipB

letitbe 04-29-2006 09:11 AM

I would like to buy one of these heat sheilds too. Anyone selling them please drop me a line.

Thank You,

thunder1 05-10-2006 06:28 PM

heat shield
 
HI guys
Just got back from my trip, will have the heat shields for the people that posted very soon sorry for the delay, the material for shields came in today.
Please E-mail me if still interested.
HOpe to see at cobra Paloosa in seabring fla this weekend.
ED

thunder1 05-22-2006 05:56 PM

Just to let you know I have Heat Shields for the Backdraft ready to ship. Please e-mail me if you are interested. ED

jp65cobra 05-22-2006 06:15 PM

Ed

Checks in the mail, snail mail :D

Thanks

John

Trueoo7 05-23-2006 08:52 PM

Sorry if this has already been answered but has a price been posted for these and was the question ever answered as to this shield covering or helping the clutch master cylinder?

Thanks

thunder1 05-30-2006 03:54 PM

In regards to the Heat shield for the Backdraft, I have a few made up and ready to ship.

ROUSHAC 06-01-2006 06:26 PM

Hi Ed,

Mine just arrived.

It took me longer to figure out how to snake it into place than to actually install it. About 5 minutes between thinking about it, taking out the four top screws, snaking it in place, putting the four screws back in, plus buffing it up with a little Mother' aluminum polish. It looks great and should really deflect the heat away from the master cylinder.

You did a great piece of engineering and fabrication on this.

Everyone who gets one will be as impressed as I was, I'm sure. If you have a Backdraft, you NEED to get one of these!!!

Ed, thanks again for thinking about the "less handy than Ed" among us and supplying this to us!

Cheers!
Dave

thunder1 06-02-2006 06:30 AM

Back Draft Heat Shield for Brakes
 
**) Dave - Thanks for the great feedback on the Backdraft Heat Shield. Glad I could share my thoughts and idea and help other with the same problem. I have found it to be very helpful on my car. ED

thunder1 06-02-2006 06:32 AM

Dave - Thanks for the great feedback on the Backdraft Heat Shield. Glad I could share my thoughts and idea and help other with the same problem. I have found it to be very helpful on my car. ED
__________________
Ed

ChuckG 06-07-2006 05:35 PM

Ed, I sent the check yesterday for 2. One for mine and one for my son-in-law's. Thanks.
Chuck

cobrak 06-08-2006 10:21 AM

Quote:

Originally Posted by thunder1
Dave - Thanks for the great feedback on the Backdraft Heat Shield. Glad I could share my thoughts and idea and help other with the same problem. I have found it to be very helpful on my car. ED
__________________
Ed

Ed;

How much do the heat shields cost?

CobraK

thunder1 06-17-2006 07:15 AM

Backdraft Heat Shield
Just to let you know I only have a few Heat Shields left ready to ship. It will depend on the interest if I order any more material to make more. If interested please e-mail me. ED

Speedysnake 06-17-2006 07:46 AM

Ed,

I got mine installed last week, looks great! I'm gonna go out for a long ride today to see if it holds the heat down. Thanks.:)

Cashburn 07-06-2006 08:54 AM

Ed,
Send us 5 more please :)

thunder1 07-18-2006 04:28 PM

Jay
5 Will be ship tomorrow

newBDR 07-20-2006 02:50 PM

Doesn't seem I can use one of these. that stationary sleeve that the steering column runs through does not exist on my car. earlier car, #31.


All times are GMT -7. The time now is 05:20 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: