After Market rims on BAckdraft

[Cobra_Troop]

Originally Posted by Bailey

Something else that comes to mind is backspacing. I remember from my FFR for 17 x 9s (different diameter and width)(94 to 04 Mustang Cobra R). Ford standard backspacing is 6" (5.95" front 6.42" rear). The newer stangs 05 to current are different. My wife's 07 backspacing is more than pre 05. SOOO to make a short story long, a lot depends on what year your Bullits are made to fit and what backspasing a BDR will need to look right. Jay may know the BDR backspacing off the top of his head. If you need it, let me know, my street wheels are off the car in the garage.
Cheers,
Richard

My buddy bought them and had them on his 2003 Cobra..I shoot him an email and get the specs...thanks for the info!

[Cashburn]

Originally Posted by Cobra_Troop

My buddy bought them and had them on his 2003 Cobra..I shoot him an email and get the specs...thanks for the info!

You maybe in luck since we have a 2003 Cobra at the shop with those wheels

[Cobra_Troop]

Originally Posted by Cashburn

You maybe in luck since we have a 2003 Cobra at the shop with those wheels

test mule...been doing some reading on the T-56 install seems like the newer models are a little more accomidating of the tranny..am I reading wrong? what about the cutout for the shifter can that be cut when ordering for my application?