Tire Balancing

wanab5150 · #1 (**permalink**) 07-31-2017, 12:55 PM

Hey randy...where did you get the hub centric rings for Superformance wheels?

Randy Rosenberg · #2 (**permalink**) 08-01-2017, 07:41 AM

Quote:

Originally Posted by wanab5150

Hey randy...where did you get the hub centric rings for Superformance wheels?

Custom Alignment in Mt. View, CA.

MFE III · #3 (**permalink**) 08-01-2017, 10:01 AM

Tom, I'm running the same tires as you. I don't get the high speed shimmy, but these tires sure do flat spot when sitting for long.

ront49 · #4 (**permalink**) 12-19-2019, 05:25 AM

Anyone have issues with the valve stems not being long enough to securely go thru the wheels? I have a BDR with 15" wheels...the tire shop guys pulled out the original stems to replace them with new ones when I had new tires installed. The wheel was approximately 9/16th inch thick where the valve stem went thru which was too deep for any of the shops stems. We couldn't find any stems that had more threads or a deeper rubber valve that would securely seat in the wheel. They pulled a standard rubber stem thru without lubricant and said it'll work...any ideas on this?

wanab5150 · #5 (**permalink**) 12-31-2019, 01:22 PM

Vintage wheels will have an answer:

(888) 339-7572
(619) 952-4717
vintagewheel@live.com

wanab5150 · #6 (**permalink**) 12-31-2019, 01:28 PM

Try Vintage Wheels.....