|
New Classic Roadsters Cobra Hardtop
1 Attachment(s)
I am looking for info and photos of the Classic Roadsters Cobra hardtop with details about embeds for windshield clip mounts and rear body mounts
Checking if it’s Cobra hardware and what’s used for body seal and top to windshield seal This is an original Classic Roadsters top mould There’s three pieces easily fitted to each car The plan is to make a top to restyle and use as a plug for a new mould Crate up the like new condition original mould Edit: added top photo from Bulldog Party On Wyatt |
Sunmam I have a classic roadster hard top will take some pic of it and try to send them; this is Bulldog I haven’t poasted in a good while,
|
Good to see you're all good Bulldog.
|
Great I am wanting spacing and what bolts are used for windshield and what are used for body mount hardware. What’s used for seals? There are 3 pieces and I’ve figured out how to fit them to car. Well not me, DV posted about fitting top. Were you involved with fitting your top and have some info? Same here I haven’t seen you for awhile, thanks for responding
Party On |
Alfa02 and Sunman will try for those pic tomorrow hope I can get them to you I just so happen to have the top on car now, Tom I am still kickin recovering from a boating accident in a July almost severed my left thumb two operations later it’s healing should get some use back;
|
ALF02 check my last post to sunman
|
No hurry thanks. Take it easy don’t strain your thumb messing with the top. Hope your healing up
|
Sunman I cant seem to get pics to you through the Forman if you don’t mind send me you email and I will try that way Bulldog
|
|
Sunman I got you’re e mail address and sent the pictures I hope they went through not to good with this computer stuff if you didn’t get them give me a shout ;
|
I sent you a phone number But I did get e mail. Thanks
I will get these pix into my gallery The old wing nut welded to all thread trick for body bolts, nice touch. Camloc draw latches and no bolts inside on windshield, great |
really interested in seeing this
|
Need pics on the progress
|
Sunman glad you got pics if you need aNything else let me know hope the pics help.
|
Bulldog everything is great on the pictures. I can upgrade body bolts and maybe find a smoother looking clamp latch for the windshield. There are a few fiberglass fab shops here going to check prices to have one chopper made. Maybe hand lay it.
Rear coil over mounts almost done will post pix soon Thanks again photos made it a lot easier then I imagined Party On |
hardtop ???
Hi can you send me the pics of the top and mounts, Please I have one but it's not a CR top but I have plans of making it fit more fab work!!!
|
I am putting the hardtop photos in the gallery will email you when it’s done. There are 3 pieces to the top. The body mount strip and inner windshield header could help your refit maybe. Could do just a front top strip with latch attachment embeds. According to a post the top is fitted to windshield then inside header strip bonded in to fit
http://www.clubcobra.com/photopost/d...F9E5BE527.jpeg |
hardtop
That would be most appreciated Thank you
|
Wyatt,
Curious how much headroom there is with the hardtop on. I am 6'4" with a fairly long torso. Either way I am getting one I am just curious how much is rises above the windshield? Thanks and as you can tell im super excited to get this when its done. |
I’m not sure but it’s not coming down just removing the bow crease look. You might need the head bump option :)
Remove seat tracks and lower seat. I’m going to widen foot area with a fiberglass piece you cut and bond in I’m finishing a side job soon, ready to focus in on the car Party On |
| All times are GMT -7. The time now is 03:06 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: