Parking brake handle and cable?

[Roylerumble]

What parking brake handle and cable have others used, or recommend?

I have a t5 from a 91 mustang and the rear is an 8.8 that I'm planning on adding disc brakes from an SN95. I could go the donor route and use one from a mustang, but was thinking about a Lokar or equivalent. The more factory route would be to have a handle mounted between the pass seat and trans tunnel. Is that possible on the CRII? I was looking at these:
https://www.summitracing.com/parts/l...7011?rrec=true

Or if I want to stay with the handle mounted on the center of the tunnel, this:
https://www.summitracing.com/parts/lok-ehb-7000f

This is the cable I was planning on using:
https://www.summitracing.com/parts/lok-ec80tu

Is there a certain year of mustang or donor route that doesn't look have all the molded plastic? I haven't been out to look at the 90's mustangs I have because they're in storage but as far as I can remember, they look like their from the 80's/90's

I'd appreciate any advice, part suggestions, pictures, ideas