Thanks again, Don. On the red car (3rd pic) is it an MSD box that's down against the firewall? That one's got the voltage regulator in the same spot where mine's mounted. That's where I've currently got the ProMaster, and seems like a logical mount point (hopefully getting some fresh air from the louvres and scoop).
A better man than I could move the regulator to place everything like you've got in the first pictures, but I'm all too aware of my limitations in the mounting/fabrication area.
Looks like the MSD coil mounts right beside the dist - is that the Blaster coil?
Thanks again, and next time you're in the garage with a camera, could I also ask for pictures of the front of the engine bay too, to see how you handle the overflow tank?
Thanks,
JLW
PS - please put me down for one of those electro-laser frabnambulators - does it come in a color other than yellow? I'm planning to calibrate it to send me psionic mental waves when it detects imminent HyFire failure.
PPS - Art - thanks for the note. In your photo gallery, is the picture of your MSD box mounted on the passenger compartment side of the firewall?
PPPS - Don - will you post to the forum when you're ready to start taking part orders for engine mounts, etc.? I know you're still currently neck-deep in getting CRII to steady state. Once again, special thanks for taking time to help greenhorns like me in the middle of all that.
Hybrid Mode
