To anyone who needs the fuel pick/sending unit!!

[abram99768]

To anyone in needs of the fuel pick up/sending unit for thier CRII.
I found this unit for sell at www.classicinstruments.com
part # SN33, direct link below.

https://www.classicinstruments.com/p...oductCode=SN33

Fuel Sender - Deluxe Stainless



The Deluxe Fuel Pick-Up Tube Sender (shown at left) features a stainless-steel mounting plate and 3/8" OD (outside diameter) x 13" long stainless pick-up tube (shorten or extend to match your own tank depth).

It includes a cork gasket, five self-sealing mounting screws, and instructions. It is designed with new heavy-duty flat-card technology resistance movement for greater accuracy, reliability, long-operating life and resistance to road-vibrations.

The sensor housing easily rotates a full 360 degrees on the stainless pick-up tube to position the float in any direction to clear internal tank baffles, side of tank, vent lines, etc.

The Deluxe Model is available only with the aftermarket standard 240-33 Ohm Heavy-Duty Sensor Movement at this time.

If another resistance range is required, choose from our Standard Model Fuel Senders shown below.

[capteddie]

Thanks!!!

That is one item I never received from CRII. Slowly and surly I'm filling in all the missing pieces.

Ed

[wetdog]

I too never recieved a pickup / sender so I used the universal sender 0 to 90 ohms that works with the classic inst. welded a bung into the side of tank with a short tube just off the floor , now I use an fitting and braided hose all the way lots easier to run . I must say the absolute lack of support from CR has made me more resourceful.