That other guy named Ed and DVs CRII build

[capteddie]

Originally Posted by wetdog

DV, you were right the bezels supplied (finish line) are sloppy for a 1 3/4 bar .Iam going to go to 2.00 it will look better and the bezels also come in 2" as well . I am also making up some brackets to attach the bar in a much stronger way , slip fit into a larger tube with some bolts going through . Tomarrow I will know cost for bending this up and if I use stainless no rust and no paint or coating costs .

Wetdog,

Let me know when you get your bar finished. I think I'm going to back to the single bar look, for the sake of time (and maybe cost). I'd be interested in a plain steel version. I'll get it powder coated for the finish.

Thanks,
Ed

[capteddie]

Ok DV....

I'm all loaded up and ready to hit the road early tomorrow morning. After this trip. You will have everything I have, except the motor, tranny, headers and side pipes.

I talked to Woody about the gauges and he said they should ship today. I also talk with my rat rod guy and he said the rear lower arms will be done next week, now that he got his show car out the door. I'll get them straight to my powder coater and have him put a rush finish on them.

The body looks really good. It still needs the spillage well glassed in, so if you want to use mine to make a mold...go for it. There also is some fine tuning around the nose opening and vent inlets on the front.

See you tomorrow. Hopefully around 11 your time if traffic and weather plays in my favor.

Ed

[Kawika]

DV if you can make a copy of ed's spillwell, That would be wonderfull, if you can ,would you make me one let me know how much you want for one that fits a crII my gas cap is 3.5" Dave

[capteddie]

Originally Posted by Kawika

DV if you can make a copy of ed's spillwell, That would be wonderfull, if you can ,would you make me one let me know how much you want for one that fits a crII my gas cap is 3.5" Dave

What other parts are you in need of? I've sourced a lot of the things I didn't get from CRII. Let me know if I can help.

Ed

[Kawika]

Capt ed That sounds great , I need front and rear coil overs w/ spacers, porp valve, rad filler neck,gas sending unit w/pickup, e-brake boot & bezel , glovebox weildment , windsheild wiper package, neat knobs release knobs ,fender gaurds ,convertible top and a pony. thank you Dave

[capteddie]

Originally Posted by Kawika

Capt ed That sounds great , I need front and rear coil overs w/ spacers, porp valve, rad filler neck,gas sending unit w/pickup, e-brake boot & bezel , glovebox weildment , windsheild wiper package, neat knobs release knobs ,fender gaurds ,convertible top and a pony. thank you Dave

LOL (a pony)!!!

OK

I have front coil overs (never used) and maybe rears too. Let me see after I meet with DV tomorrow. If my bank account holds out, maybe I'll swap out the rear coil overs before the car hits the street.

filler neck? Are you planning on using a inline neck? If so, I got one from Summit. I'll post the part #.

Windshield wiper unit? Got mine from FinishLine. Again I'll talk with DV tomorrow and if it looks like the one I got is the right one, I'll pass along the part numbers.

Talk to DV about the soft top.

Ed

[Kawika]

That sound great Ed , what ever you and Ed come up with is good enough for me . Have fun tomorrow with you new car Thanks again ,and my wife thanks you too Dave

[Kawika]

Originally Posted by capteddie

LOL (a pony)!!!

OK

I have front coil overs (never used) and maybe rears too. Let me see after I meet with DV tomorrow. If my bank account holds out, maybe I'll swap out the rear coil overs before the car hits the street.

filler neck? Are you planning on using a inline neck? If so, I got one from Summit. I'll post the part #.

Windshield wiper unit? Got mine from FinishLine. Again I'll talk with DV tomorrow and if it looks like the one I got is the right one, I'll pass along the part numbers.

Talk to DV about the soft top.

Ed

ED did you get the part # for the windsheld wiper unit? Thanks Dave