That other guy named Ed and DVs CRII build

Double Venom · #1 (**permalink**) 08-30-2008, 07:45 AM

OK,
The numbers are NOW right. The ....160AD is an accessory part that is needed to mount the wheel. I doubt if Summitt would have anything needed on the accessory side.
On the other side, Chad finally, after over 40 parts found the right adapters to the tranny and I am putting them in now. Stainless #6 to Stainless #10 to the oil cooler.
Sorry about the mistyping.
DV

capteddie · #2 (**permalink**) 08-30-2008, 02:59 PM

Well....

Still nothing comes up on Flaming Rivers site when I search for 160AD

I'll call them first thing Tuesday and give them the part # of the wheel and the column and get what we need.

Double Venom · #3 (**permalink**) 08-30-2008, 04:37 PM

Ed
the 160... is the last series of the correct number instead of what I sent you the first time. Sorry if I got confusing. Lets try this one more time:

FR20160AD IS the correct complete number.

You will have to ask them if a large Plastic shaped dish is needed with this column/wheel and that we do not have the "nut" that normally holds a steering wheel on? (I doubt if this wheel uses that type of nut but without seeing the adapter, the mentioned number, I don't know including a heavy gauge spring that is normally used, may not be used with this wheel.
I hope that I have made this somewhat understandable this time!
DV

capteddie · #4 (**permalink**) 08-30-2008, 06:00 PM

Gotcha Pal !!!!!

I'll call them first thing Tuesday morning and get you what you need.