That other guy named Ed and DVs CRII build

[Ronbo]

Yep DV those should work. But since the studs are really there to prevent twisting and they don't hold the top down the nuts aren't really needed. I'm just a little anal about stuff inside the air cleaner.

A rubber base gasket as opposed to the paper one might also stop the twisting.

What the heck it's a Cobra, just safety wire it!

[capteddie]

DV,

The 3 things you needed from Soft Seal and will be dropped shipped to you. You should have them by the end of the week.

Cheers!

[Double Venom]

How do you install a Vent that neither the body nor the Vent were made to match?

Cut and Mold of course!



DV

PS. It always get uglier before it gets pretty

[capteddie]

Hey DV!

Hold off on bending those hard cooling lines. I still want them, but I looking at something to add to them to handle the filler issue. I'll post some pictures of what I'm talking about after I talk to finishline to get some questions answered. Looks like you've been real busy with finishing up the body work, so hopefully you haven't had time to play with the bender and the new dies.

Cheers!