25 hours into finale phase, day 3, 87 to go;
Well i either jinxed myself, or I missed my calling and I should be a prophet. Today started out rather difficult. spent almost 4 hours trying to get the QA1 shocks and springs installed on just one side. after that I decided that it just was not going to work. Just way too many reasons why it was not right. i will save them and rework the upper shock mount on other cobra and use them there.
Once I decided to go with the equipment that I test drove the car with things picked up pace some. I started a sort of assembly line process.
Piece one, sanded and primed, while piece one was drying I sanded piece two, then after priming piece two, I painted piece one. then sanded piece three to allow the first two pieces to dry. then primed piece 3, painted number 2, and installed number one, continued that fashion for nearly 6 hours. Kept me moving forward and got a few things installed on suspension. Still have a couple things drying for install tomorrow first thing.
Here is a pix of some black stuff up against the silver stuff.
http://farm3.static.flickr.com/2726/...e094b941_b.jpg
at least I ended the day on a upbeat note.
Yes, Bob, I think you gave some solid advice, and I am going to carry through the entire frame the silver, but am going to leave the rear-end black.
see ya all,,,, Ray
1Likes
Threaded Mode
