Big Block Street

[DanEC]

Damn - you all made go look as I couldn’t distinctly remember doing that on my ERAs street fuel filler when I built it about 8 years ago. Peered into the trunk and didn’t see anything there. Then I reached in to feel for something I could tie a ground lead to and there it was on the backside of the filler leading down to the tank.

[cobrakiwi]

Originally Posted by DanEC

Damn - you all made go look as I couldn’t distinctly remember doing that on my ERAs street fuel filler when I built it about 8 years ago. Peered into the trunk and didn’t see anything there. Then I reached in to feel for something I could tie a ground lead to and there it was on the backside of the filler leading down to the tank.

Dan
Would you have a picture of how ERA, or you have added the wire to your fill cap neck?

Thanks

[DanEC]

Originally Posted by cobrakiwi

Dan
Would you have a picture of how ERA, or you have added the wire to your fill cap neck?

Thanks

Well, I keep forgetting this is the only auto forum I can't post pictures too anymore because I don't have a photo storage account any longer and can't paste from my computer. Basically ERA tacks a threaded stud to the down pipe section coming off the filler and a ground wire going underfloor to the frame or the tank. If you would like me to email a picture pm me your email.

Dan

[patrickt]

Originally Posted by DanEC

Well, I keep forgetting this is the only auto forum I can't post pictures too anymore because I don't have a photo storage account any longer and can't paste from my computer. Basically ERA tacks a threaded stud to the down pipe section coming off the filler and a ground wire going underfloor to the frame or the tank. If you would like me to email a picture pm me your email.

Dan

This forum gives you like 100 megs of space to upload pics and I just looked and you haven't uploaded even one. Just click on the camera icon under your name on any of your posts and then choose "Upload Photos" from the upper right of the screen. It's really easy. I mean, really easy.

[patrickt]

Originally Posted by DanEC

Damn - you all made go look as I couldn’t distinctly remember doing that on my ERAs street fuel filler when I built it about 8 years ago. Peered into the trunk and didn’t see anything there. Then I reached in to feel for something I could tie a ground lead to and there it was on the backside of the filler leading down to the tank.

It should be pretty easy to find... unless it was forgotten. Here's a pic of mine. This is not my work, it was done by the elves at ERA many years ago. And by the way, I broke out the VOM and measured the resistance to ground on the filler cap itself both open and closed. It was as close to zero ohms as you can get.

[patrickt]

And if you have a really sharp eye you will see that Bob P. actually labeled that ground wire as "66" and, sure enough, if you go to the ERA wiring instruction manual you will see that connection 66 is titled "GROUND FOR FUEL FILLER PIPE" and that black wire leads to the rear bumper bracket ground point.

[patrickt]