ccx ride hieght?

Danielg · #1 (**permalink**) 09-08-2010, 01:55 PM

If your running 295/50-15 in the rear, 235/60-15 in the front, does anyone have a measurement from the bottom of the frame front to ground? and the same for the rear-the rear measurement at the bottom of the frame at the rear cross member the pinion sits on?
Thanks,
Daniel

mickmate · #2 (**permalink**) 09-08-2010, 02:38 PM

Daniel you have the CCX manual don't you?

1985 CCX · #3 (**permalink**) 09-08-2010, 05:41 PM

We can probably set him up!

Danielg · #4 (**permalink**) 09-08-2010, 06:44 PM

Yes I have the manual.....I was just lazy, it's in the shop and well..I'm not.Thought some one might know it off the top of there head.
Daniel
Yes I 'll go look. It's time for a cold one.

Danielg · #5 (**permalink**) 09-08-2010, 08:32 PM

Okay, page 13 thru 27 do not answer the question. Using a ride height gauge during install does not give you real world.
So......does anyone have time take beer break and use a good old fashion tape measure? lol.
Daniel

Bob Perry · #6 (**permalink**) 09-08-2010, 09:32 PM

Daniel, Im running the same size tires with aladin shocks and my front is 25 1/4 from the ground to the fender well (on center line of axel) and the rear is 26 inches.You can check my gallery photos to see if its at a height that you like.and you can go from there hope this helps...Bob

Danielg · #7 (**permalink**) 09-08-2010, 10:21 PM

Thank you!
Daniel