Daytona Coupe inspired build help

rickl750 · #1 (**permalink**) 10-01-2010, 09:06 AM

Hi Guys,
I'm new to this forum and in the beginning stages of building Daytona inspired car. I do have some 30yrs experience building and restoring muscle and sports cars so I’m not new to this. I've been searching this forum along with the web for plans/patterns/drawings to build the front part of the body and also information on building a buck for the same. I'm primarily interested in building in aluminum and just the nose but so far I've had very little luck. I found this website http://home.comcast.net/~chuckcobra/ and sent an email but I’m not sure if I can get what I need plus I would like to find additional sources so if anyone has any information or contacts that could help me find this type of information I would really appreciate it.

Thanks you again in advance,

Regards

Rick

Clois Harlan · #2 (**permalink**) 10-01-2010, 10:29 AM

Rick,

I recall someone pounding a coupe out of aluminum some time ago and if I remember correctly it was pretty awsome. I wish I could help but I am still finishing up a glass coupe of my own.

Clois Harlan