New coupe

Mark IV · #1 (**permalink**) 10-27-2017, 10:14 AM

Quote:

Originally Posted by Blacklemming

hello,
am I wrong when I say they look like 18 "cobra wheels?

But it is not a bad look at all.

Yes, search "Superformance Brock Coupe" for pictures. Ignore the wheels on the red coupe that is Peter Brock's car, he has his own custom wheels on the car.

Blacklemming · #2 (**permalink**) 07-28-2019, 10:16 AM

Hi all,

A small update on the project.
The engine decision is over.
My engine builder called me a while ago about a Ford 302 that was up for sale.
As it turned out it was a Dart block, but instead of a 302 it’s a 363.
It was the spare engine of a drag racing team.
That engine ran on ethanol because of the compression ratio.
So it has been disassembled and rebuild for pump gas.
I hope to post some pictures
Greetings

Blacklemming · #3 (**permalink**) 09-28-2021, 10:15 AM

Hello all,

Update

It is not a 302 block but a 289 and would like to purchase a pulley setup for the alternator,water pump and air conditioning.
There is an ati muffler on the crankshaft and the water pump is installed.
Can anyone help me ,I don't know what to look for when purchasing.
And since I live in Europe sending it back is not an option.

I will try to post pictures

Blacklemming · #4 (**permalink**) 09-28-2021, 10:33 AM

https://flic.kr/ps/3UQz5s

cycleguy55 · #5 (**permalink**) 09-29-2021, 09:29 AM

Quote:

Originally Posted by Blacklemming

Hello all,

Update

It is not a 302 block but a 289 and would like to purchase a pulley setup for the alternator,water pump and air conditioning.
There is an ati muffler on the crankshaft and the water pump is installed.
Can anyone help me ,I don't know what to look for when purchasing.
And since I live in Europe sending it back is not an option.

I will try to post pictures

CVF Racing has great systems. https://www.cvfracing.com/ford-289-3...lternator-a-c/

I'd be inclined to order the system with pulleys so you don't end up with a system that's incompatible with your pulleys. Alternatively, you could reach out to their technical support to sort out exactly what you need. That's what I did when I ordered from them, and they advised me that I needed to change my power steering pulley, but that my March Performance water pump and crankshaft pulleys were 100% compatible. Technical support is at https://support.cvfracing.com/hc/en-us

Blacklemming · #6 (**permalink**) 09-29-2021, 12:21 PM

Thank you