Progress of ERA 2139

[wolf k]

Thanks for the nice compliments fellas, I really appreciate them.

Jeff, pipe is pre-bent mandrel sections from JEGS in which I welded up.

Glen, ground clearance is 4.5" at the mufflers, my problem is going to be at the oil pan with only 3" ground clearance, especially with that drain plug. Will have to go with the Aviaid pan

[xb-60]

If the pan is still going to be the lowest point, what about fabricating a sump guard for at least some protection?
Cheers,
Glen

[wolf k]

Going this route with the oil pan. 6.5 inches tall