Driver seat position

[DanEC]

Originally Posted by Kramer

FWIW.... At 6'2"" I gave my seat all the back and pedals all the way toward the front and I'm good....

OK - well, you're a lot more than 40 inches from the clutch then.

[Grubby]

It is possible to change the clutch travel. There are two holes on the bottom end of the pedal. You can move the slave cylinder rod to the lower one to lessen the travel. It will increase the clutch pedal effort.

John

[DanEC]

Originally Posted by Grubby

It is possible to change the clutch travel. There are two holes on the bottom end of the pedal. You can move the slave cylinder rod to the lower one to lessen the travel. It will increase the clutch pedal effort.

John

John - I remember seeing that. Mine was in the short-throw position. I also changed to a 7/8 inch master cylinder which shortened the throw a little.