ERA carpet removal...

[kevins2]

The ERA build manual has illustrated instructions showing spray adhesive is used to install the carpeting. However, as Dan pointed out, buyers could easily go their own way, so best to confirm.

[Bernica]

It seems to me that in the big picture of things, just pull the carpet and preserve best you can however it is currently attached. If you can save them you can always use them for templates for new stuff. I would personally rather have it all glued down as opposed to velcro or other such.

My 2 c...

[patrickt]

Call Peter to check, but the mounts for the roll bar should be there, but you'll need to make some holes. Ripping up the carpeting will not be that difficult and this stuff will remove the adhesive residue. You can get it in bigger cans, too.

[ame="http://www.amazon.com/3M-08987-General-Purpose-Adhesive/dp/B0002NUO6K/ref=pd_sbs_263_2?ie=UTF8&dpID=414YffWsfAL&dpSrc=si ms&preST=_AC_UL160_SR160%2C160_&refRID=1CMDFQ1S1KS P9HHDHNAN"]Amazon.com: 3M 08987 General Purpose Adhesive Cleaner - 15 oz.: Automotive@@AMEPARAM@@http://ecx.images-amazon.com/images/I/414YffWsfAL.@@AMEPARAM@@414YffWsfAL[/ame]