Thermostatic fan control

[Trans-Am Jim]

Bob:
While you are answering wiring questions, I though I'd throw this one in.

While at the shop on Monday, I picked up a thermostat and housing to replace my non-working thermo fan control. I figured I'd wire it into the existing circuit. Wrong. The wires, and the relay are not there. Up to this point, the fan has been manually activated thru a dash switch and relay.
Looks like I'll be building this circuit. Is there a diagram on the website which shows the wiring from switch to relay including the manual override switch.

It was good to finally meet you, Peter, and the rest of the ERA group.

[Bob Putnam]

Jim,

Here's the wiring diagram. The very early cars (I don't know whether yours is one) had an adjustable thermostat that wired directly to the fans, so you may have to pick up power from the fuse box for the relay.