Original ford bumperettes

[Alfa02]

@ joyridin' make sure these (Or whatever) Bumperette's you buy, are the right size, bolt hole to bolt hole. I know when looking for overrides there wasn't enough (Meat) on the back brackets to modify to the 3 1/2" I needed to fit the Classic Roadster. When we tried to make brackets to fit over the tubes for our Club Badges there are 3-different sizes (Bolt hole space) from one Cobra to another. Most are 2.25"

[joyridin']

Originally Posted by Alfa02

@ joyridin' make sure these (Or whatever) Bumperette's you buy, are the right size, bolt hole to bolt hole. I know when looking for overrides there wasn't enough (Meat) on the back brackets to modify to the 3 1/2" I needed to fit the Classic Roadster. When we tried to make brackets to fit over the tubes for our Club Badges there are 3-different sizes (Bolt hole space) from one Cobra to another. Most are 2.25"

Mine are small. I do not remember the exact size, but the ones I have on there now has 1 of the holes drilled in a different place. The ones you have would be way too big. I would have to put a plate on the back and drill the place to fit my pattern. Thanks for the info!

[1985 CCX]

Ok, one question
Did Ford really provide these to AC in these small prodution #'s?
Would think AC would have made these in UK as part of the rolling package to SAI as Ford was a motor/trans supplier, no?