|
AL Flywheels ?
Which is better?
Fidanza 186541 for $390 14lbs. Mcleod 563210 for $576 18lbs. Why is Mcleod so expensive? What is the difference? Thanks. |
does the fidanza have a steel insert? i take it does. maybe thickness make a difference or material or maybe if it's made out of USA, might be cheaper. hate to say that but thats just what this country has come to. but thats a different story.
|
If you're going for aluminum, my thought is that you're going for lightweight....so you should go for the lightest piece. I sell Fidanza, RAM, and McLeod flywheels, and the Fidanza is a very nice wheel.
Both flywheels that you mentioned have multiple pressure plate patterns on them, so they will work with any clutch application. I can beat both prices that you mentioned. I use the Fidanza quite a bit, even on my own FE stuff. With the McLeod, you're paying for their name. I have almost stopped selling McLeod stuff because of the pricing. (And yes, both have steel inserts. You have to have a steel friction surface, or the disc would wear right through the aluminum.) |
hey brent, what do you know about low ground clearance flywheels and bellhousings and clutches. building bonneville car and looking for a 104 tooth flywheel setup. have 608 cu in drysump motor to install on.
|
Let me know what you're working on....BBF? How much power?
|
1000hp@7200 rpm have a liberty pro-shifted m-22 for trans in a 72 camaro
|
Transmission?
|
also would like to run hyd. thro out
|
Is it a Ford application? What transmission?
|
Quote:
|
11/8 x 26 spline input. M-22 muncie stuff
|
Ok cool....
|
Looks like Tilton has everything that you need. I'd go with one of their 104T flywheels that's setup for one of their 7.25" twin disc button clutch kits. They have aluminum/magnesium bellhousings for Chevy applications as well.
Want pricing? |
i know it's late back east, and it's saturday nite. so if you want to get back to me later, thats ok. just know that i am in the market for such a clutch setup and any help would be much appreciated
|
oh ............well hell yes. thanks
|
Tilton has a complete Ultimate Ground Clearance package consisting of:
*8 lb magnesium bellhousing *3-disc 5.5" clutch, 1-5/32x26 (will work with your 1-1/8x26) *102T flexplate (approximately 8-5/8" diameter) *Reverse mount Super Starter *Hydraulic throw out bearing kit It's $2999 for everything. Free shipping. |
brent, you have a pm
|
Quote:
|
Fidanza flywheels are manufactured in Perry Ohio, the next town over from me. Been there, bought the wheel. Nice folks. They also make the flywheels for Zoom, from what I understand.
|
With the Club Cobra discount, the Fidanza 186541 would be $359 + shipping.
|
| All times are GMT -7. The time now is 11:16 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: