|
Stacks on FE?
My modur of choice will be an FE, no doubt about it.
I think I want a stack system on top. While the Webers are the pure way to go, I think I'll make a concession to some more modern engine management methods and go with an EFI stack system. The question: does just a thing exist? I know it does for the small blocks, but what about the FE? And if so, who makes it? Anyone personally know of a builder with direct experience in such a set-up? Thanks. |
Yes, TWM makes a set http://www.twminduction.com/v8_kits/427.html
So does Inglese http://www.compperformancegroupstore...htStackSystems Another company makes them too, can not remember their name right now. I'm building an FE with TWM Stacks, with the FAST EZ-EFI injection system, should be fun :) |
Alan:
Several systems available. I'm sure someone will chime in with info for you. DonC |
Try Jim Inglese for the Webers (not Inglese Induction Systems)
http://www.jiminglese.com/index.html or Wayne Presley for stack FI http://www.verycoolparts.com/ Both have a lot of experience with BB Cobras. |
Check out my pics if u want to see a twm system on a 427 Fe..... I thought like u and this is the route I eventually chose
|
Wayne Presley did my system....I am sure all the people mentioned are good....but, Wayne is VERY GOOD. www.verycoolparts.com. 760/403-6266.
good luck |
My system is by Imagine Injection www.imagineinjection.com in Pheonix and is on a 428 FE.
http://www.clubcobra.com/photopost/d..._03-2007_1.JPG |
Quote:
|
This company does the Weber look-a-like without the visible fuel rails:
http://www.dynaformance.com/ TWM was purchased by Borla. |
Quote:
|
Inglese makes a real nice system at about half the price of the TMW system. I have it on my SBF and it works with the EZ Fast EFI managment system.
http://www.inglese.com/Catalog/ Hope this helps. |
Here are a couple examples of TWM based sytems - one with a Big Stuff 3 controller, the other with a FAST EZ_EFI.
http://www.youtube.com/user/Survival...14/PvZASWFSddM http://www.youtube.com/user/Survival.../6/QR1E92NUsTU |
I had one of Waynes on my FE. I was fun and looked really cool. Got lots of attention when I opened the hood.
|
another image of EFI stacks
1 Attachment(s)
This is a Roush 511 8 stack EFI.
|
Great info, everyone! And thanks for the pron, which does nothing except reinforce my direction. It's an expensive direction to go, I know, but I plan on building only one of these so why the hell not.
I'll look at all the options (including the Weber carb route) and get all learned up before making any decision. Heck, I haven't even started the build yet, so I'm a good ways out on getting the engine. Thanks again. |
|
On the subject of stacks.... is it necessary to get angled stacks for the cobra? My engine builder asked if I wanted to go with the 10 degree angled stacks for clearance... I have seen both vertical and angled set ups in different cobras.
|
Quote:
Never seen them on a small block. |
Yep... Mostly big blocks...also depends on the type and style if stacks/ horns
|
Ps..did u decide on the induction system / engine combo?
|
| All times are GMT -7. The time now is 07:55 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: