
11-08-2008, 06:42 PM
|
|
Senior Club Cobra Member
|
|
|
Join Date: Jul 2003
Location: Santa Fe,
NM
Cobra Make, Engine: Cardiac, 428 FE
Posts: 301
|
|
Not Ranked
hford,
The block you are evaluating should be sonic checked no matter what the bore size indicates. If you have to act fast on this one, I recommend a pass if it's done without the sonic check.
The previous owner might have bored it without the check and then found out the walls were too thin.
I would also trust what you hear from Barry, he's built a bunch of FE motors that last. He's a pro. There are some real experts on FE motors on this site. Trust them.
I would also ignore what you're hearing about 427 blocks since that doesn't apply to what you have.
Last edited by SantaFe66; 11-08-2008 at 06:44 PM..
Reason: left out statement
|