-
FE TALK
(
http://www.clubcobra.com/forums/fe-talk/)
| ScratchBuilder |
07-25-2016 01:26 PM |
I ordered the canister bracket from a vendor on ebay and will see how things fit. I like the look of the canister but concerned about vapor lock with the poor gas out here, on my gt350 i had to get rid of the hardline and mechanical fuel pump to get the car useable in warm weather several years ago when the gas formulations changed. I suspect a lot of ethanol...
|
| ScratchBuilder |
07-27-2016 03:39 PM |
1 Attachment(s)
Flywheel on and torqued to spec
|
| redmt |
07-27-2016 03:56 PM |
Mark when you get to dialing in the bellhousing I have an easy peasy way of centering them up pretty quick. Give me a holler if you need a hand when your ready.
|
| cobrakiwi |
07-27-2016 05:35 PM |
Nice, what clutch setup will you be using?
Don't forget the pilot bearing/bushing;)
|
| ScratchBuilder |
07-27-2016 05:49 PM |
Quote:
Originally Posted by cobrakiwi
(Post 1400331)
Nice, what clutch setup will you be using?
Don't forget the pilot bearing/bushing;)
|
Yup on pilot bushing, pic reminds me to put one in:) |
| davids2toys |
07-28-2016 06:19 AM |
Quote:
Originally Posted by redmt
(Post 1400321)
Mark when you get to dialing in the bellhousing I have an easy peasy way of centering them up pretty quick. Give me a holler if you need a hand when your ready.
|
Sounds great...It would be awesome if you could share it with all of us. |
| Jack Zupan |
07-28-2016 10:10 AM |
Quote:
Originally Posted by redmt
(Post 1400321)
Mark when you get to dialing in the bellhousing I have an easy peasy way of centering them up pretty quick. Give me a holler if you need a hand when your ready.
|
I would like to hear about this too. Can you put it in a thread? |
| redmt |
07-28-2016 11:59 AM |
Quote:
Originally Posted by Jack Zupan
(Post 1400418)
I would like to hear about this too. Can you put it in a thread?
|
Actually,,,, Mark doesn't live but an hour or so from me and was going to do it "live". I did a tutor-torial on it on another forum a couple years ago but took it down. Let me see if I still have enough of the pix to do it again.
Please keep something in mind that it is the way I do it and not the only way. It is the only way I have found to be easily repeatable without realignment every time. |
| ScratchBuilder |
07-28-2016 12:35 PM |
Lets put it together and take some pics. Out of town this weekend but following should work
|
| ScratchBuilder |
07-28-2016 08:37 PM |
1 Attachment(s)
Fuel canister bracket arrived today. Also the clutch im using in the background.
|
| All times are GMT -7. The time now is 11:01 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
