Tilton pedal assembly

thardin · #1 (**permalink**) 09-08-2003, 09:22 PM

Has anyone installed one of the floor mount systems like the one in this link. I am trying to get as much room as possible in the footbox, and thought these might help me. Size 13 foot.

http://www.tiltonracing.com/brake/pedals

thardin · #2 (**permalink**) 09-08-2003, 09:23 PM

Try this...

http://www.tiltonracing.com/brake/pedals.html

hdheritage97 · #3 (**permalink**) 09-08-2003, 09:48 PM

I have the under dash mount and let me say, I have small feet, 9.5, and STILL no room in there....lol. Good luck my friend, about the most uncomfortable car you'll ever drive, but well worth the pain....lol.

Cliff

Cracker · #4 (**permalink**) 09-09-2003, 05:27 AM

I have that system in my car but required quite alot of work to fit them. The upside is that (if you care) the cage I made to bolt the assembly to is just like an original with the little stubby master cylinders fitting under the side exhaust. I've had no problem with brake fade whatsoever and the pedals work great! The only thing I didn't consider when building the cage is allowing room for the Brake Bias adjuster so don't make that mistake.

I have attached photos to the links below and if you want more detail feel free to call me at #800-895-7531 x101 for how I went about doing it. Best wishes!

http://www.clubcobra.com/photopost/s...php?photo=9231

http://www.clubcobra.com/photopost/s...t=1&thecat=500



FE Forums sponsored by Keith Craft Inc.