Inspection or under pan needed for an FE

[R U YELLA]

I need to replace the pan on the bell housing. Do you know where I can locate one?

Thanks
Ed

[FFR428]

There is a couple on epay right now.....G.

[The Dreamer]

Unless you are painting that can, you need a new username. Get a NEW bellhousing and insure your legs.

[R U YELLA]

Talk about user names! That's all your going to be doing if you don't get your but in gear and stop doing all those stupid mods.

Later
Ed

[Sizzler]

Originally posted by R U YELLA


I need to replace the pan on the bell housing. Do you know where I can locate one?

Thanks
Ed

Are you talking about the transmission pan?
If so any aftermarket parts house will sell you one.

If you're talking about the 2/3rd moon flat piece that covers the lower part of the flywheel, then ebay might be easiest. But I drove at least 5 years without one without a problem.

[Notorious MCB]

I have reviewed your request for a pan on the bell housing and I find no significant issues.

[R U YELLA]

Thanks Guys! After all I have done on this engine I forgot to look at the clutch size. The engine came with a small input & I got the big input toploader. After talking to David Kee - the bellhousing is also too deep by 1/2". CRAPOLA! All new stuff after the crankshaft!

Later
Ed