
06-13-2005, 06:33 AM
|
 |
Ed Digges
|
|
|
Join Date: Mar 2001
Location: Falls Church,
VA
Cobra Make, Engine: Kirkham #328 w/ 390FE
Posts: 408
|
|
Not Ranked
Here is a good article that I found and used: http://www.squarebirds.org/rear_main_seal.htm
I did it twice and found that you should not use sealant between the caps. Offset the two seals so they don't line up with the caps and put a small amount of sealant on the ends. My leak was actually coming from the cam shaft expansion plug. Whoever rebuilt the engine for the previous owner installed it backwards!
|