06-14-2005, 06:38 AM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Jun 2004
Location: Huntington,
VT
Cobra Make, Engine: E-M 427 Top Oiler stroked to 482 by KC, Stage 2 heads, a Quikfuel and Voila, 640 hp
Posts: 502
|
|
Not Ranked
Measured the clearence last night and a 3" (total 4.67") filter won't fit under the hood. The engine runs well with adequate power but I'm sure it's starving for air with the S&H filter and does run rich. I initially thought the 650 was undersized but slogging through the Demon site, it appears to be fine for the engine as a street machine. I'd like to hear what the engine guys around here think - Keith and George if they stumble across this thread.
I'll go look at the Edlebrock site. The stainless screen is cool and looks like the Extreme top from K&N. That may be the solution.
Tim
__________________
At first, nothing happened. Then after a few seconds, nothing continued to happen.
Douglas Adams - Hitchhiker's guide to the Galaxy
|
Threaded Mode
