Magnetic Oil Plug & Oil Needed

priobe · #1 (**permalink**) 05-11-2007, 01:26 PM

Hello All,

I would like to know where most of you purchased you magnetic oil plug for the Armondo' Pan (if it makes a difference).

Also, I would like to find out what oil the 427 SO guys are using in the motor.

rdorman · #2 (**permalink**) 05-11-2007, 01:34 PM

Jegs or Summit... practically any parts store. For flat tappet motors I like Rotello T synthetic (watch the zinc content on flat tappet motors). I have an Armondo pan as well. Really nice. Practically identical to the Aviad (he used to make those as well) and good oil control. In hard cornering my pressure used to drop to zero, with his pan it is rock steady.

priobe · #3 (**permalink**) 05-11-2007, 02:13 PM

Thanks for the reply.

I found a dealer local that has a case of 12 for $34

I am thinking of switching from Mobile 1 Synthetic

priobe · #4 (**permalink**) 05-11-2007, 02:23 PM

Also do you know the specs on the drain plug.

blykins · #5 (**permalink**) 05-11-2007, 03:31 PM

I run Rotella 10W40

rdorman · #6 (**permalink**) 05-14-2007, 06:27 AM

Sorry but I don't recall the specs.



FE Forums sponsored by Keith Craft Inc.