comp cams hydraulic roller lifters

wrench87 · #1 (**permalink**) 11-14-2007, 04:15 AM

i just saw on comp cams site that they now sell hydraulic roller lifters for the ford fe, i guess before crane was the only one who sold them. is any body using them i wonder how they compare to the cranes they are a little bit more money around 575.00 compared to 499.00 for cranes.

danc30 · #2 (**permalink**) 11-14-2007, 07:57 AM

Keith used a Comp Cams custom hydraulic roller set-up for mine. Runs great, but I don't have very many miles on it yet.

Duration 248/252, Lift .630, Lobe separation 110
Erson Rocker System, Comp Pushrods, Crane Lifters

Dan

Barry_R · #3 (**permalink**) 11-14-2007, 02:46 PM

I've put in a couple sets now - - they seem to work pretty well...

BOURRET · #4 (**permalink**) 11-16-2007, 08:59 AM

Quote:

Originally Posted by danc30

Keith used a Comp Cams custom hydraulic roller set-up for mine. Runs great, but I don't have very many miles on it yet.

Duration 248/252, Lift .630, Lobe separation 110
Erson Rocker System, Comp Pushrods, Crane Lifters

Dan

I have comp cams hyd. roller set up for my Keith 482:
duration: 262°
Lift:.622"
Separation: 112°
since 17 000 miles.



FE Forums sponsored by Keith Craft Inc.