
04-22-2008, 04:19 PM
|
 |
CC Member
|
|
|
Join Date: Feb 2006
Location: Ft. Worth,
Tx
Cobra Make, Engine:
Posts: 257
|
|
Not Ranked
First off go with grade 8 bolts for the flywheel and pressure plate. Secoundly Ram does not include bolts with there clutches you will need to get those. As for the locktite, I would go with the red. I am sure you know this but I will state it anyways do not use an impact on the pressure plate bolts you can warp it. It sounds like you have your ducks in a row on your install, another captain obvious response but make sure you have all the proper safety gear to go with the tools you are planning on useing, i.e. safety glasses, gloves. jimig@standardtransmission.com
__________________
True friendship is like peeing your pants, everyone can see it, but only you can feel its warmth.
Plan your life like you will live to be 120 years old...Live your life like you could die tomorrow.
|