05-30-2009, 07:16 PM
|
 |
CC Member
|
|
|
Join Date: May 2001
Location: California,
Ca
Cobra Make, Engine: NAF 289 Slabside Early Comp Car with 289 Webers and all the goodies. Cancelling the efforts of several Priuses
Posts: 6,592
|
|
Not Ranked
There are applications where this will work, I know it fits the small diameter Distributors for Windsors and 289/302.
As mentioned above the Spring Blade in the center of the rotor must make actual contact with the carbon button. I found a good way to check is to put a film of Dielectric grease, assemble the cap onto the distributor and then remove the cap an check the carbon button for indication of grease and the rotor blade for the inpression of the button, adjust the Spring Blade accordingly, then remove the grease.
http://msdignition.com/Products/Dist...tributors.aspx
__________________
Rick
As you slide down the Banister of Life, may the splinters never be pointing the wrong way 
Last edited by Rick Parker; 05-30-2009 at 10:05 PM..
|
Hybrid Mode
