HiTech 111

1985 CCX · #1 (**permalink**) 04-16-2022, 03:17 PM

Today was a partial work on 111 day.
Roll bar now has mechanical fastener.
Installed 16” wheel.
Installed caps.
Installed Enots cap.
Removed plate, NH now allows no front. Law just passed

1985 CCX · #2 (**permalink**) 04-16-2022, 03:19 PM

Exchanged Phillips head with slot SS.

1985 CCX · #3 (**permalink**) 04-16-2022, 03:22 PM

Reversed quick jacks.
Worked in door latch as it was stuck.
Also tinkering with brakes, a little shimmy.
Gonna have to stop as Bill May not take the $ and I’ll have to Reverse.....

Blue66 · #4 (**permalink**) 07-06-2022, 07:15 PM

Is this a 390 CI car ? Think I remember it from a car show at Yankee Smokehouse years ago.

1985 CCX · #5 (**permalink**) 07-07-2022, 03:12 PM

This car has 427 Center Oiler, 0.017 over. As I understand in the car since at least 2013, prior to that in California.
Forged Pistons
Erson Hydraulic cam/lifters/rockers
Edelbrock heads
Port match Sidwinder
780 carb
9qt pan

The car you remember may have been the other red HT car, now Kevin's, which has had a re-body and a motor change since then.

Alloy Hi-Tech Build

???