Stumble off idle -

[bingo2]

Brent's "guy" built a HR 650 with mechanical secondaries for my motor and I couldn't be happier with the results.

After making the usual adjustments; idle speed, choke, float height, etc. the motor ran beautifully, albiet a bit lazy. Dyno revealed a slight lean condition and going up two sizes on the main jets cured that; 368/347 hp/tq at the wheels.

[Grubby]

The carb is here. It is installed with intial adjustments made. Time for a short road test only.

My first impression is the car has much more power. I will get an extended drive in this week.

John

[patrickt]

Originally Posted by Grubby

The carb is here. It is installed with intial adjustments made. Time for a short road test only.

My first impression is the car has much more power. I will get an extended drive in this week.

John

So how did this finally turn out? Is the stumble now completely gone throughout the rev band?