holley ultra hp 750 installation on 351

[SPF1061]

Vector -
Let me ask a question about the road race floats you bought. Are they metal and soldered or are they plastic and epoxied? I run an AED carb, which I love, but their road race floats are plastic and the #%*! ethanol fuel eats the glue. I am forced to run street floats which create major bogging / stalling under hard braking and hard turns. If you have found metal road race floats please let me know the source. Thanks.

[vector1]

Originally Posted by SPF1061

Vector -
Let me ask a question about the road race floats you bought. Are they metal and soldered or are they plastic and epoxied? I run an AED carb, which I love, but their road race floats are plastic and the #%*! ethanol fuel eats the glue. I am forced to run street floats which create major bogging / stalling under hard braking and hard turns. If you have found metal road race floats please let me know the source. Thanks.

i bought mine from braswell, and they are supposed to be good with alcohol if i remember right. 163051 & 163010


Braswell Carburetion-Severe-Duty -- Floats - Page 1

[SPF1061]

Originally Posted by vector1

i bought mine from braswell, and they are supposed to be good with alcohol if i remember right. 163051 & 163010


Braswell Carburetion-Severe-Duty -- Floats - Page 1

Thanks. How long have you ben running these? The problem I had was not with the float material per se, but the epoxy that was used to attach the arm to the float body. The ethanol in pump gas was slowly dissolving the epoxy.