Club Cobra
Page 44 of 62 « First 343637383940414243 44 454647484950515254 Last »
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Kirkham Motorsports (http://www.clubcobra.com/forums/kirkham-motorsports/)
-   -   Kirkham SALE!!! Scratch and Dent Clean Up Do It Yourself (http://www.clubcobra.com/forums/kirkham-motorsports/107825-kirkham-sale-scratch-dent-clean-up-do-yourself.html)

David Kirkham 12-16-2010 02:34 PM
Quote:
Originally Posted by nobby (Post 1096690)
HI David, any chance you've looked into shipping for that dash....

Rob...:)
Looking right now.

David
:):):)

nobby 12-16-2010 02:36 PM
Thank you very much

legenmetals 12-16-2010 05:57 PM
2 Attachment(s)
David,

I'm not sure what you mean by forward mount vs. the rear mount shifter.

So I sent some pictures and measurements. Ctr to Ctr of the adjustment as the assembly came off the car. 1st rod was adjusted to 14.75". 2nd rod was 9.75" and 3rd rod was 9.625".

Hope this helps. Mark

David Kirkham 12-16-2010 06:25 PM
Quote:
Originally Posted by legenmetals (Post 1096725)
David,

I'm not sure what you mean by forward mount vs. the rear mount shifter.

So I sent some pictures and measurements. Ctr to Ctr of the adjustment as the assembly came off the car. 1st rod was adjusted to 14.75". 2nd rod was 9.75" and 3rd rod was 9.625".

Hope this helps. Mark
That is a Hurst shifter. Our rods won't work with it. Our rods work with the original shift box.

Bummer,

David
:):):)

jolsen42 12-16-2010 07:15 PM
Quote:
Originally Posted by David Kirkham (Post 1096679)
We are out of 289 Street dashes. We are looking into making a few more, however.

David
:):):)
David, if you do make some 289 dashes would it be possible to make them as the original ones with the lower section offset to the driver and not centered.
http://img.photobucket.com/albums/v6...8193-3-640.jpg
Please let me know if this is possible. Also I just need the glovebox cutout and not the gauges. Thank you, John O

David Kirkham 12-16-2010 09:16 PM
More parts coming up

David Kirkham 12-16-2010 09:19 PM
Quote:
Originally Posted by jolsen42 (Post 1096736)
David, if you do make some 289 dashes would it be possible to make them as the original ones with the lower section offset to the driver and not centered.
http://img.photobucket.com/albums/v6...8193-3-640.jpg
Please let me know if this is possible. Also I just need the glovebox cutout and not the gauges. Thank you, John O
I will look into this. We don't have a tool here in the US to make those dashes so the ones we sold were the only ones we had. We make them in Poland. However, if enough people want them we will make a tool to make them here.

David
:):):)

David Kirkham 12-16-2010 09:21 PM
Lots of boxes. I had to set up two tables to organize the small boxes. The large ones are by the cars.

http://www.clubcobra.com/photopost/d...63_Medium_.JPG

David Kirkham 12-16-2010 09:25 PM
GARAGE ART

This is an aluminum 427 rear upright forging we made in Poland. The bore has been machined oversized.

SOLD

$50

http://www.clubcobra.com/photopost/d...64_Medium_.JPG

David Kirkham 12-16-2010 09:27 PM
Prototype carburetor feed lines. The ends are dash 8. We use dash 6. One of he hexes is machined slightly off as well.

Retail $50
Today $20

http://www.clubcobra.com/photopost/d...66_Medium_.JPG

David Kirkham 12-16-2010 09:31 PM
Unknown alternator brackets. Probably to a 289 and an FE.

$15 for all of them.

SOLD POST 896

http://www.clubcobra.com/photopost/d...65_Medium_.JPG

David Kirkham 12-16-2010 09:34 PM
Prototype billet gas cap. We were having a hard time getting gas caps so we just decided to make them ourselves out of billet aluminum. The hole for the pivot of the latch was not drilled in the center. For the ambitious, they could weld up the hole and drill a new one. If not, nice garage art.

Retail $295 (for a good one)
Today $50

http://www.clubcobra.com/photopost/d...67_Medium_.JPG

http://www.clubcobra.com/photopost/d...68_Medium_.JPG

David Kirkham 12-16-2010 09:36 PM
This is another prototype billet gas cap. Fully functional. We just haven't polished it yet.

The billet aluminum polishes up like a mirror.

Retail $295
Today $125

SOLD POST 891

http://www.clubcobra.com/photopost/d...69_Medium_.JPG

Racer_X 12-16-2010 09:40 PM
Quote:
Originally Posted by David Kirkham (Post 1096685)
Expansion tank. Specify right or left outlet, 289 or 427

$500 Retail
$400 on sale at various times
$350 today :D

David
:):):)
David,
I'll take one of the expansion tanks, 427, left (driver side) outlet, added to my box.
Thank you.
Racer_X

David Kirkham 12-16-2010 09:43 PM
Used lower oil remote for an FE
Retail $75
Today $25

http://www.clubcobra.com/photopost/d...70_Medium_.JPG

David Kirkham 12-16-2010 09:45 PM
GARAGE ART
This is an upper oil remote bracket that we don't use any more.

$5

SOLD POST 878

http://www.clubcobra.com/photopost/d...72_Medium_.JPG

David Kirkham 12-16-2010 09:46 PM
Lower oil remote and fittings for an FE

Retail $100
Today $50

SOLD POST 870

http://www.clubcobra.com/photopost/d...71_Medium_.JPG

tkb289 12-16-2010 09:47 PM
Quote:
Originally Posted by David Kirkham (Post 1096766)
GARAGE ART
This is an upper oil remote bracket that we don't use any more.

$5

http://www.clubcobra.com/photopost/d...72_Medium_.JPG
David,

I'll take the bracket ... you can add it to my 'collection' :)

Thanks!

- Tim

David Kirkham 12-16-2010 09:49 PM
Motorcraft alternator, new in the box.

$15

SOLD POST 884

http://www.clubcobra.com/photopost/d...73_Medium_.JPG

http://www.clubcobra.com/photopost/d...74_Medium_.JPG

http://www.clubcobra.com/photopost/d...75_Medium_.JPG

http://www.clubcobra.com/photopost/d...76_Medium_.JPG

Racer_X 12-16-2010 09:50 PM
Quote:
Originally Posted by David Kirkham (Post 1096767)
Lower oil remote and fittings for an FE

Retail $100
Today $50

http://www.clubcobra.com/photopost/d...71_Medium_.JPG

I'll take it.

Racer_X


All times are GMT -7. The time now is 03:50 AM.
Page 44 of 62 « First 343637383940414243 44 454647484950515254 Last »
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: