Club Cobra
Page 54 of 62 « First 4444647484950515253 54 5556575859606162
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Kirkham Motorsports (http://www.clubcobra.com/forums/kirkham-motorsports/)
-   -   Kirkham SALE!!! Scratch and Dent Clean Up Do It Yourself (http://www.clubcobra.com/forums/kirkham-motorsports/107825-kirkham-sale-scratch-dent-clean-up-do-yourself.html)

David Kirkham 12-19-2010 04:15 PM
Quote:
Originally Posted by David Kirkham (Post 1094053)
Lower oil remote adapter. Used to make an oil cooler system on an FE 390, 427, 428 block.

Retail $75
Today $25

http://www.clubcobra.com/photopost/d...26_Medium_.JPG

Price lowered
$20

David Kirkham 12-19-2010 04:17 PM
Quote:
Originally Posted by David Kirkham (Post 1094082)
Billet Skateboard :)

Great Christmas gift for your kids or grandkids :)

Retail $275
Today $195

http://www.clubcobra.com/photopost/d...34_Medium_.JPG
Last chance on a great longboard

David Kirkham 12-19-2010 04:18 PM
Quote:
Originally Posted by David Kirkham (Post 1094140)
Original FE intake manifold breather for a 390, 427, 428. We have 3 of these.

$20

http://www.clubcobra.com/photopost/d...53_Medium_.JPG
We have 2 of these left

David Kirkham 12-19-2010 04:20 PM
Quote:
Originally Posted by David Kirkham (Post 1094142)
Garage Art!

Cast Kirkham Motorsports brake and clutch pedal. Investment cast in aluminum. We have 20 of these in stock. They are not machined.

$10

http://www.clubcobra.com/photopost/d...52_Medium_.JPG
We have about 20 of these left

nobby 12-19-2010 04:20 PM
Quote:
Originally Posted by David Kirkham (Post 1097430)
Found another roll of vinyl. There are probably 8 yards on this roll.


This is the vinyl we used on our first cars to cover the rear wheel well panels, the rear bulkhead, and the dash.

56 inches wide

$25

http://www.clubcobra.com/photopost/d...14_Medium_.JPG
David, if i end up with the dash i will need something to cover it with so if we work out shipping and what i want i'll take the vinyl too. do you perhaps have a picture and a price for your steel side pipes. i just want to make sure i get the right things, sorry to take up so much of your time..
Rob.. i will try and look into freight from my end too if your not having any luck, i'm holding tight:)

Three Peaks 12-19-2010 04:21 PM
Quote:
Originally Posted by David Kirkham (Post 1097435)
$50 each
$25 each
David,
Will these bearings fit the stub axle housings on the differential I bought?

Also, if it isn't spoken for I'll take the vinyl above.

Thanks,
Bob

David Kirkham 12-19-2010 04:21 PM
Quote:
Originally Posted by David Kirkham (Post 1094147)
We have two front, left jack hooks. Steel.

$15 each.

http://www.clubcobra.com/photopost/d...54_Medium_.JPG
We have 1 left

David Kirkham 12-19-2010 04:30 PM
This is a nearly complete set if FIA gauges. Autometer. 6 gauges here. Missing the fuel level gauge. New, in the box!

Includes
3 3/8" Speedo and Tach
2 5/8 volt, oil pressure, oil temperature, water temperature

Retail full set--$750 (less $100 for the fuel level gauge at $100). Retail for 6 gauges--$600

Today--$300

http://www.clubcobra.com/photopost/d...83_Medium_.JPG

http://www.clubcobra.com/photopost/d...84_Medium_.JPG

http://www.clubcobra.com/photopost/d...85_Medium_.JPG

Water Temperature
http://www.clubcobra.com/photopost/d...82_Medium_.JPG

Volt Meter
http://www.clubcobra.com/photopost/d...81_Medium_.JPG

Oil Temperature
http://www.clubcobra.com/photopost/d...78_Medium_.JPG

Oil Pressure
http://www.clubcobra.com/photopost/d...76_Medium_.JPG

Speedometer
http://www.clubcobra.com/photopost/d...79_Medium_.JPG

Tachometer
http://www.clubcobra.com/photopost/d...77_Medium_.JPG

Still Available--GREAT price

David Kirkham 12-19-2010 04:37 PM
Quote:
Originally Posted by David Kirkham (Post 1094795)
FREE. Anyone need it?

David Kirkham 12-19-2010 04:39 PM
Quote:
Originally Posted by David Kirkham (Post 1094797)
Fuel inlets. Notice one of them is a little boogered up.

Dash 6

NOTE: These are too short to use with one of our Turkey Pans.

$20

http://www.clubcobra.com/photopost/d...90_Medium_.JPG
$10 for both

David Kirkham 12-19-2010 04:41 PM
Quote:
Originally Posted by David Kirkham (Post 1094799)
Kirkham reproduction of a Stellings Air cleaner. Made from stainless.

$125 retail
$45 Today

We have 10

1 SOLD

http://www.clubcobra.com/photopost/d...89_Medium_.JPG
We still have some of these left

David Kirkham 12-19-2010 04:42 PM
Quote:
Originally Posted by David Kirkham (Post 1094800)
Free. If you have a box here already I'll toss these in.

David Kirkham 12-19-2010 04:46 PM
Quote:
Originally Posted by David Kirkham (Post 1094801)
Garage Art!

This is the clip that holds the brake pads in place on the Girling Comp calipers. There are 8 of these per car. We made them in stainless.

$2 each

http://www.clubcobra.com/photopost/d...93_Medium_.JPG
We will let these go for $1 Each

David Kirkham 12-19-2010 05:01 PM
Quote:
Originally Posted by David Kirkham (Post 1094578)
Garage Art

This is the seat back we took off an original 289 Cobra some time ago. The seat back is NOT an original seat back. May be good as a pattern.

$10

http://www.clubcobra.com/photopost/d...74_Medium_.JPG
Out the door for $5

David Kirkham 12-19-2010 05:03 PM
Quote:
Originally Posted by David Kirkham (Post 1094803)
Another set of valve cover breathers. Notice the one I have turned over is a little boogered up.

$5

http://www.clubcobra.com/photopost/d...95_Medium_.JPG

http://www.clubcobra.com/photopost/d...96_Medium_.JPG
Another set for free

NOTE: We can't do free shipping on any of these parts. However, if you already have a box here, I'll be happy to throw them in.

David Kirkham 12-19-2010 05:05 PM
Quote:
Originally Posted by David Kirkham (Post 1094808)
More free loot

David Kirkham 12-19-2010 05:07 PM
Quote:
Originally Posted by David Kirkham (Post 1094808)
COLOR="red"]And some more free loot[/color]

David Kirkham 12-19-2010 05:13 PM
Quote:
Originally Posted by David Kirkham (Post 1094818)
FE under driven harmonic balancer pulley. This slows down the speed on the harmonic balancer pulley so you drag racers don't smoke your alternator. 5 inches in diameter. We have 5

Retail $100

Today $50

1 SOLD

http://www.clubcobra.com/photopost/d...06_Medium_.JPG
We are holding this price until the end of this sale

David Kirkham 12-19-2010 05:14 PM
Quote:
Originally Posted by David Kirkham (Post 1094819)
FE water pump pulley. This is the pulley we use with our harmonic balancer pulley. The small diameter speeds up the water pump so you don't overheat your chariot of fire in traffic.

We have 5

Retail $100
Today $75 (this takes a big, expensive billet)

1 SOLD

http://www.clubcobra.com/photopost/d...05_Medium_.JPG
We are holding this price until the end of the sale

David Kirkham 12-19-2010 05:16 PM
Quote:
Originally Posted by David Kirkham (Post 1094821)
FE Oil filter adapter for the block. The original 427 Cobra street cars ran this type of set up. We have 2.

$5

1 SOLD post 612

http://www.clubcobra.com/photopost/d...07_Medium_.JPG
We have 3 more of these


All times are GMT -7. The time now is 10:59 AM.
Page 54 of 62 « First 4444647484950515253 54 5556575859606162
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: