Kirkham SALE!!! Scratch and Dent Clean Up Do It Yourself

[jmimac351]

If you happen to have Water Temp and Oil Press gauges still around I'd be interested in those as well.

[tkb289]

David,

I'll take the rotor hat #996 and ebrake parts #997 if they are available.

Thanks!

- Tim

[David Kirkham]

Originally Posted by tkb289

David,

I'll take the rotor hat #996 and ebrake parts #997 if they are available.

Thanks!

- Tim

The rotor hat is in your box. LMH scooped up the e-brake parts already.

David

[David Kirkham]

Aluminum front jack hooks. Powder coated black. The powder coating is bad and they will need to be repainted.

$50 both
$40

[David Kirkham]

It seems like this thread isn't going away any time soon

David

[David Kirkham]

Differential 2

Differential with axle housings and bearings.

This differential case had the OUTER pinion bore machined over sized. If you want to bore it out and sleeve it you can save a very expensive case. The differential unit is a 19 Power Lock--the same unit used in an original car. The axle housings are copies of the original with the taper roller bearings. You will have to clean or replace the bearings.

Differential case $2000
Side axle housing with bearings $300 x 2 for $600
Power Lock Differential $475
Retail $3075
Today $900
$800

[David Kirkham]

Originally Posted by David Kirkham

Differential 2

Differential with axle housings and bearings.

This differential case had the OUTER pinion bore machined over sized. If you want to bore it out and sleeve it you can save a very expensive case. The differential unit is a 19 Power Lock--the same unit used in an original car. The axle housings are copies of the original with the taper roller bearings. You will have to clean or replace the bearings.

Differential case $2000
Side axle housing with bearings $300 x 2 for $600
Power Lock Differential $475
Retail $3075
Today $900
$800

Now only $700

[David Kirkham]

Front rotors. Used. Blue from heavy braking. Lightly grooved.

12.2 x 1.25

$25 pair
$20

[David Kirkham]

Rotor 12.2 x 1.25

Has a casting flaw. Garage Art

$20
$15

[David Kirkham]

Right rear jack hook that had a bad day.

Steel

Garage Art

$15
$10

[David Kirkham]

THESE CAME BACK UP FOR SALE. THE CUSTOMER DECIDED TO BUY OUR STAINLESS PIPES INSTEAD.

These are pictures of prototype 427 S/C head tubes. These head tubes are not completely welded and will need some tweaking and welding to finish them up. Tubes are made from mild steel.

Retail $1,000.
Today $250.
$200

Please see the below description.

Below:

Left head tubes. Notice the "hole" between head tube #5 and #6. That is where the steering shaft goes through the pipes on the original car. The #5 tube is to the right in the below photo.


The #5 tube is to the left in the below photo.



#7 and #8 are do not have the flanges welded to the tube. They are only tacked into place.


#7 only has the tube tacked together. It is not welded together.


The flange on #7 is 3/16-1/4" of an inch away from the flange. The tube will have to be stretched and tweaked to fit.


The following 2 pictures are of the right side. The right side head tubes are quite short--just like an original car.

[David Kirkham]

Below are a set of 427 head tubes that fit a 351 motor.

Notice the head tubes extend all the way out of the body. We designed these so the merge collector on the side pipe is outside the body--just like CSX3020 that Dave Dralle used to drive.

These are made from steel. The flanges will bolt onto the narrow exhaust bolt pattern. They are brand new and in perfect condition.

Head tubes retail $1000.
Today $500
$400

[David Kirkham]

FE motor mounts

Picture of the different kinds below:

After Market mounts.

We have two sets of these mounts. Please note, one of the studs is longer than the other one. That won't matter when you put in your motor, but just making sure you know. We have 4 each. 3 with the short stud. 1 with the long stud.

$10 each
$5 each




WE ALSO HAVE 4 FORD MOUNTS LEFT

Ford C6SZ mounts.

We used these mounts for years on our cars until they were no longer available.

Retail $75 each
Today $35 each.
$30 each

[David Kirkham]

427 dash panel. The one in the picture has been powder coated black. We don't have any more powder coated dashes. We will extend this sale to our normal, unpainted aluminum dashes until we sell the rest of these parts.

$350 Retail.
UNTIL SALE ENDS $150

[1ntCobra]

The car in the upper right hand corner of the picture appears to be discolored into an odd gold or copper color. It would probably take you a while to clean that up, you should throw it into the sale.

Originally Posted by David Kirkham

427 dash panel. The one in the picture has been powder coated black. We don't have any more powder coated dashes. We will extend this sale to our normal, unpainted aluminum dashes until we sell the rest of these parts.

$350 Retail.
UNTIL SALE ENDS $150

[David Kirkham]

Originally Posted by 1ntCobra

The car in the upper right hand corner of the picture appears to be discolored into an odd gold or copper color. It would probably take you a while to clean that up, you should throw it into the sale.

That is one of the 13 we need to finish

and...

rumor has it there is another one being made...

David

[David Kirkham]

We have 2 trunk trays for a 427 street car. They are very similar to the trunk tray of a 289 car and can be used in a 289 car. (The 289 car has a cross molded into the bottom.) This one has the holes already drilled in it for access to the differential bolts. This one already has the roll bar holes in both sides.

Retail $450
Today $125
$100

[David Kirkham]

Front oil cooler scoop and lower radiator opening for a 427.

I just found more of these. Great Garage Art.

Retail $500.
Today $250.
$195

[CobraV8]

Originally Posted by David Kirkham

Front oil cooler scoop and lower radiator opening for a 427.

I just found more of these. Great Garage Art.

Retail $500.
Today $250.
$195

David, I'm very interested in one of these, but I have some concerns about shipping of such bulky parts. USPS seems to have the most reasonable rates for international delivery, could you please give me a shipping quote for the lower rad opening?

Thanks,

Simon

[David Kirkham]

Originally Posted by CobraV8

David, I'm very interested in one of these, but I have some concerns about shipping of such bulky parts. USPS seems to have the most reasonable rates for international delivery, could you please give me a shipping quote for the lower rad opening?

Thanks,

Simon

Simon,

For our European friends, we will simply send the part from Poland. That will be much cheaper for you. No sense wasting money on shipping.

David