Kirkham SALE!!! Scratch and Dent Clean Up Do It Yourself

[mrmustang]

David,

If you find a "cobra in a box" crated "kit" laying around from the original offering, I'm first on the list




Bill S.

[David Kirkham]

Originally Posted by mrmustang

David,

If you find a "cobra in a box" crated "kit" laying around from the original offering, I'm first on the list

Bill S.

Original offering?

David

[mrmustang]

Originally Posted by David Kirkham

Original offering?

David

Original offering= 25K "Kirkham in a box" (aka: Crate Kirkham). Maybe a forgotten car where someone put down a deposit and then forgot to pick it up . You know, sitting in a crate in the corner of the shop,unbuilt, unloved, but not unwanted . I've got the perfect drivetrain for a 427SC and sell my ERA as a roller (unless you want an ERA roller without motor and transmission as an even trade for a "Kirkham in a box" ).


Have a great holiday weekend with your family.


Bill S.

[David Kirkham]

Originally Posted by mrmustang

Original offering= 25K "Kirkham in a box" (aka: Crate Kirkham). Maybe a forgotten car where someone put down a deposit and then forgot to pick it up . You know, sitting in a crate in the corner of the shop,unbuilt, unloved, but not unwanted . I've got the perfect drivetrain for a 427SC and sell my ERA as a roller (unless you want an ERA roller without motor and transmission as an even trade for a "Kirkham in a box" ).

Have a great holiday weekend with your family.

Bill S.

Bill,

Oh yes, our experiment into fiberglass cars that turned into aluminum cars.

I wish we could sell rollers at $25K. Today, a frame and body goes for more than that. (Falling dollar and all that).

As for a scratch and dent frame and body--you never know what we will find around here.

David

[cdnus]

David,

Would you have one of the really neat shifter rod kits for a toploader in the S&D bin?
I am using the forward mount position (289?) with a Hurst shifter.

Craig

[Racer_X]

I'll post my list to see if you have any scratch and dent pieces I need.

Pedal box - Stainless - bare, no components needed
Left side foot box - fiberglass
Left front suspension upper a-arm w/ balljoint - machined aluminum - early car (2004).
Left lower front suspension a-arm w/ balljoint - mild steel tube - early car (2004),
Left side steering knuckle, spindle, axle stub, bearing, disk assembly.
Any left front side body components and nose
Front Left suspension structure - welded onto chassis-stainless.
Left side 427 headers and sidepipe - mild steel. or both sides in stainless
Driver and Passenger seats

[David Kirkham]

Racer_X

What is the serial number of your car? I need it to see what parts you need.

Pedal box - Stainless - bare, no components needed
We do have a few stainless pedal boxes. How about $75?

Left side foot box - fiberglass
$400 retail--$200 today

Left front suspension upper a-arm w/ balljoint - machined aluminum - early car (2004).
I need a picture to see what you need. We have gone through several upgrades in suspension over time.

Left lower front suspension a-arm w/ balljoint - mild steel tube - early car (2004),
I need a picture to see what you need. We do have a few control arms left--not many, however.

Left side steering knuckle, spindle, axle stub, bearing, disk assembly.
Need a picture.

Any left front side body components and nose
hmmm, I think we have a few parts left. What exact body parts do you need? Send a picture and I'll see what I can dig up.

Front Left suspension structure - welded onto chassis-stainless.
Are you talking about the frame here? Which tubes?

Left side 427 headers and sidepipe - mild steel. or both sides in stainless
I will look for scratch and dent exhaust. There is one guy ahead of you in line and I think he is going to want the steel we have. We also have a set of stainless that were damaged.

Driver and Passenger seats
$1800 retail...$1400 today.

WOW,

I'm beginning to think we might have enough scratch and dent parts around here to make a complete car

Come to think of it...one of my guys just did that EXACT same thing a couple of months ago. He put together a COMPLETE car with scratch and dent parts from around the shop. My dad even GAVE him a 360 motor out of a pick up. He pulled it out, put on an Aviad pan and BOOM--started right up. Working here does have some cool advantages.

David

[David Kirkham]

Originally Posted by cdnus

David,

Would you have one of the really neat shifter rod kits for a toploader in the S&D bin?
I am using the forward mount position (289?) with a Hurst shifter.

Craig

Hmmmm,

I seem to remember some short shifter rods somewhere...

I'll look tomorrow. At this rate the shop will be cleaned out in no time.

David

[cdnus]

Originally Posted by cdnus

David,
Post #35

Would you have one of the really neat shifter rod kits for a toploader in the S&D bin?
I am using the forward mount position (289?) with a Hurst shifter.

Craig

Any luck yet ?

Craig

[David Kirkham]

Originally Posted by cdnus

Any luck yet ?

Craig

Looking. Those will be with the other shifter stuff. No telling what else I might find on the way.

David

[David Kirkham]

Originally Posted by cdnus

Any luck yet ?

Craig

Is this what you are looking for

Retail $200 ($60 just in bearings).
Today, for friends in Canada, $100

David