Kirkham SALE!!! Scratch and Dent Clean Up Do It Yourself

[Fox]

Hey David,

How about a carrier for the Jag third member that provides the "ears" for mounting?

I appreciate the efforts to check...

-John

[RestoCreations]

Ill just put the whole list up

1. Pedal assembly
2. Master cylinders
3. Hydraulic clutch
4. Reservoirs
5. Carpet
6. Passenger seat
7. E-brake boot
8. Radiator
9. Radiator tubes and hoses
10. Header tubes or headers
11. Sidepipes
12. 427 FE engine intake manifold plate
13. Engine pulleys
14. Differential vent and reservoir
15. Driveshaft
16. Driveshaft safety loop
17 Exterior mirror'
18 Visors
19. Wind wings
20. Shifter
21. Throttle linkage
22. Vent kit

[David Kirkham]

RestoCreations

Answers below:

1. Pedal assembly
How much of the assembly do you want? Do you want the reservoirs, reservoir lines? Do you want original type pedals or do you want Kirkham pedals?

2. Master cylinders
What sizes?

3. Hydraulic clutch
Do you want our hydraulic throw out bearing assembly, or an original type one? What transmission?

4. Reservoirs
Billet aluminum? Original steel type?

5. Carpet
Nylon or wool?

6. Passenger seat
Yes, we have seats in stock. They are $900 each. They are very high quality. We even use leather for the welting. The pleats are true tuck-and-roll, not just sewn down over foam. They are quite nice. Just for this thread I'll let one go for $700

7. E-brake boot
Original cars don't have them.

8. Radiator
We don't have any scratch and dent ones in stock. I think we are out of radiators right now. I'll check.

9. Radiator tubes and hoses
Yes, I saw a dinged set today. $300 retail--$150.

10. Header tubes or headers
Stainless or steel?

11. Sidepipes
stainless or steel?

12. 427 FE engine intake manifold plate
Not sure what you are referring to? I did take down several intake manifolds today. We even have a 1965 Medium Riser dual quad intake I found.

13. Engine pulleys
We have some harmonic balancer pulleys. $100 retail. $25 until they are gone. I think we have 4 or 5. They are from Keith Craft. They fit a Big Block Chevy (don't worry). They need to be slightly slotted to fit an FE. We have used several of them, but finally ended up making our own matched set.

We also have some alternator pulleys--I think 3. $10 each

14. Differential vent and reservoir
We use our brake cans for this. A brake can is $100 retail. We have a few scratch and dents. Maybe 2 or 3. I'll let them go for $25 each.

15. Driveshaft
I'll post the part numbers.

16. Driveshaft safety loop
I sold 16 of these today! LOL. $125 retail. $75. There are only 3 left. It is a complicated piece--not just a "U" bolt.

17 Exterior mirror
Which mirror do you want?

18 Visors
I doubt we have any scratch and dents.

19. Wind wings
I don't think we have any scratch and dents...but...not that I think about it...

We do have a LOT of extra hardware. I'll check on this. You can always cut them out from plexiglass and then use the hardware. I'll post drawings if you are interested.

20. Shifter
Which shifter? Which transmission?

21. Throttle linkage
$125 retail. I'll let one go for $75. Again, it is a complicated part.

22. Vent kit
I don't think we have any scratch and dents. I'll have to check.

Thanks!

David

[saltytri]

David K.:

Is your piano scratched?

Happy Thanksgiving to you and the family!

David I.

[David Kirkham]

Originally Posted by saltytri

David K.:

Is your piano scratched?

Happy Thanksgiving to you and the family!

David I.

Yes, the piano is scratched...quite a bit in fact. It is scratched because it is loved. Just tonight my kids played Mozart, Bach and, Chopin. I love to listen to them play. I stopped taking lessons when I got so heavily involved with politics. I still play, however.

The piano is not for sale. I don't believe I will ever sell it. If I get a new one, I'll just take this one to the shop

Actually, the "attic cleaning" is because I am building a gym here at the shop. I need the space to get ready for some challenges this next summer

Happy Thanksgiving to all you guys!

David

[RodKnock]

Originally Posted by David Kirkham

Actually, the "attic cleaning" is because I am building a gym here at the shop. I need the space to get ready for some challenges this next summer

Happy Thanksgiving to all you guys!

David

Most folks would just join a gym. The Kirkhams? They build one.

[David Kirkham]

Originally Posted by RodKnock

Most folks would just join a gym. The Kirkhams? They build one.

I'm getting into Crossfit now. I really like it. Too many fun things to do while you are working out.

Joining a "normal" gym doesn't really cut it as they are quite boring. Who wants to go there and run on a treadmill for hours? A critical part of working out is being with your friends. I got thinking about it. Where are all my close friends? Right here at the shop. So, I just decided to make a gym here so we could all work out together. Besides, they will all feel better and be happier after working out. It gives us all a goal to work for together.

David

[David Kirkham]

Originally Posted by Fox

Hey David,

How about a carrier for the Jag third member that provides the "ears" for mounting?

I appreciate the efforts to check...

-John

I am not quite sure what you mean. Do you want the conversion mounts that enable you to mount a Jaguar differential into a Cobra chassis?

David

[Fox]

Yes, I am looking for the carrier that mounts a Jag diff to the Cobra 289 style frame. If that is what is mentioned in the previous post of yours for $150, I'll take it. Can I give you a call Monday to take care if the particulars or would online/PayPal be easier?

Thanks... -John

Originally Posted by David Kirkham

I am not quite sure what you mean. Do you want the conversion mounts that enable you to mount a Jaguar differential into a Cobra chassis?

David

[David Kirkham]

Originally Posted by Fox

Yes, I am looking for the carrier that mounts a Jag diff to the Cobra 289 style frame. If that is what is mentioned in the previous post of yours for $150, I'll take it. Can I give you a call Monday to take care if the particulars or would online/PayPal be easier?

Thanks... -John

John,

Sorry, bad news. We do have the Jag diff mounts--but they will not work in a 289 chassis. The suspension tower is simply too tight. We worked and worked on that some time ago but there is no way to get one to fit.

You will HAVE to go with an original style differential. We might have a scratch and dent one floating around if you are interested. It could save you a lot of money.

David

[RestoCreations]

1. Pedal assembly
How much of the assembly do you want? Do you want the reservoirs, reservoir lines? Do you want original type pedals or do you want Kirkham pedals?

I need the entire thing with reservoirs, lines and master cylinders. It doesnt matter which pedals it has-i like both

2. Master cylinders
What sizes?
I dont know-whatever comes standard i suppose-i just installed the brake lines you all sent last week.

3. Hydraulic clutch
Do you want our hydraulic throw out bearing assembly, or an original type one? What transmission?
TKO600-whichever system will work best with it. I think you all use a throwout bearing as opposed to the slave cylinder system.

4. Reservoirs
Billet aluminum? Original steel type?

answer: Whichever are cheaper probably-original type???

5. Carpet
Nylon or wool?
I thought you only sold wool. I dont mind nylon.

6. Passenger seat
Yes, we have seats in stock. They are $900 each. They are very high quality. We even use leather for the welting. The pleats are true tuck-and-roll, not just sewn down over foam. They are quite nice. Just for this thread I'll let one go for $700

Thanks-yall are great!!!

7. E-brake boot
Original cars don't have them.

I was not aware of that.

8. Radiator
We don't have any scratch and dent ones in stock. I think we are out of radiators right now. I'll check.
Thanks

9. Radiator tubes and hoses
Yes, I saw a dinged set today. $300 retail--$150.

Ill take them!

10. Header tubes or headers
Stainless or steel?
Steel-i am just going to paint them white anyway-same with #11

11. Sidepipes
stainless or steel?

12. 427 FE engine intake manifold plate
Not sure what you are referring to? I did take down several intake manifolds today. We even have a 1965 Medium Riser dual quad intake I found.

hmmm-well, i was just going to buy an edelbrock aluminum intake, but please let me know what else you all have. The plate I am referring to is the breather plate on the back that vents to the puke tank

13. Engine pulleys
We have some harmonic balancer pulleys. $100 retail. $25 until they are gone. I think we have 4 or 5. They are from Keith Craft. They fit a Big Block Chevy (don't worry). They need to be slightly slotted to fit an FE. We have used several of them, but finally ended up making our own matched set.

We also have some alternator pulleys--I think 3. $10 each

Ill take one of each and i guess grab whichever waterpump pulley to match at a later date

14. Differential vent and reservoir
We use our brake cans for this. A brake can is $100 retail. We have a few scratch and dents. Maybe 2 or 3. I'll let them go for $25 each.

I'll take all 3 if they are still available

15. Driveshaft
I'll post the part numbers.

16. Driveshaft safety loop
I sold 16 of these today! LOL. $125 retail. $75. There are only 3 left. It is a complicated piece--not just a "U" bolt.

Ill take one of these too

17 Exterior mirror
Which mirror do you want?

Which one do you normally use? I think i prefer the brushed non-bullet style mirror

18 Visors
I doubt we have any scratch and dents.
No problem. Just asking

19. Wind wings
I don't think we have any scratch and dents...but...not that I think about it...

We do have a LOT of extra hardware. I'll check on this. You can always cut them out from plexiglass and then use the hardware. I'll post drawings if you are interested.
Its so hot in AL most of the year that i probably will not want them anyway. Thanks

20. Shifter
Which shifter? Which transmission?
TKO 600-the one you all make that is shown in the build thread

21. Throttle linkage
$125 retail. I'll let one go for $75. Again, it is a complicated part.
And again, i am in for one

22. Vent kit
I don't think we have any scratch and dents. I'll have to check.3. Hydraulic clutch

Thanks so much and Happy Thanksgiving! Yall are very generous!
Ill call on Monday!

BTW, be careful at crossfit!!! I have had several friends get injured doing crossfit at a local gym. However, they were in horrible shape when they started and they attempted to progress too quickly with the work outs. Its a wonderful and very effective routine as long as you move at the appropriate pace.