Kirkham SALE!!! Scratch and Dent Clean Up Do It Yourself

[David Kirkham]

Racer_X

What is the serial number of your car? I need it to see what parts you need.

Pedal box - Stainless - bare, no components needed
We do have a few stainless pedal boxes. How about $75?

Left side foot box - fiberglass
$400 retail--$200 today

Left front suspension upper a-arm w/ balljoint - machined aluminum - early car (2004).
I need a picture to see what you need. We have gone through several upgrades in suspension over time.

Left lower front suspension a-arm w/ balljoint - mild steel tube - early car (2004),
I need a picture to see what you need. We do have a few control arms left--not many, however.

Left side steering knuckle, spindle, axle stub, bearing, disk assembly.
Need a picture.

Any left front side body components and nose
hmmm, I think we have a few parts left. What exact body parts do you need? Send a picture and I'll see what I can dig up.

Front Left suspension structure - welded onto chassis-stainless.
Are you talking about the frame here? Which tubes?

Left side 427 headers and sidepipe - mild steel. or both sides in stainless
I will look for scratch and dent exhaust. There is one guy ahead of you in line and I think he is going to want the steel we have. We also have a set of stainless that were damaged.

Driver and Passenger seats
$1800 retail...$1400 today.

WOW,

I'm beginning to think we might have enough scratch and dent parts around here to make a complete car

Come to think of it...one of my guys just did that EXACT same thing a couple of months ago. He put together a COMPLETE car with scratch and dent parts from around the shop. My dad even GAVE him a 360 motor out of a pick up. He pulled it out, put on an Aviad pan and BOOM--started right up. Working here does have some cool advantages.

David

[slider701]

Originally Posted by David Kirkham

Working here does have some cool advantages.

David

Are you guys hiring??? I can't think of a cooler job to have as a mechanical engineer than working for you guys!

[Racer_X]

Originally Posted by David Kirkham

Racer_X

What is the serial number of your car? I need it to see what parts you need. My car is #374

Pedal box - Stainless - bare, no components needed
We do have a few stainless pedal boxes. How about $75?
Sounds fine, I'll take it.

Left side foot box - fiberglass
$400 retail--$200 today
I'll take it.

Left front suspension upper a-arm w/ balljoint - machined aluminum - early car (2004).
I need a picture to see what you need. We have gone through several upgrades in suspension over time.
I can attach pics here or email them to you, which would you like?
I'll send pics.

Left lower front suspension a-arm w/ balljoint - mild steel tube - early car (2004),
I need a picture to see what you need. We do have a few control arms left--not many, however.
I'll send pics.

Left side steering knuckle, spindle, axle stub, bearing, disk assembly.
Need a picture.
I'll send pics.

Any left front side body components and nose
hmmm, I think we have a few parts left. What exact body parts do you need? Send a picture and I'll see what I can dig up.
I need the lower nose, left front fender from light to door.
I'll send pics.

Front Left suspension structure - welded onto chassis-stainless.
Are you talking about the frame here? Which tubes?
Yes, the welded frame, looks like 2 inch tubes, specifically the vertical 2 tube assy. with horizontal tube that attaches the upper A-Arm to the chassis.

Left side 427 headers and sidepipe - mild steel. or both sides in stainless
I will look for scratch and dent exhaust. There is one guy ahead of you in line and I think he is going to want the steel we have. We also have a set of stainless that were damaged.
Just let me know. The left side was gone when I got the car. If you have one, I'll take it, otherwise let me know about the stainless as well, please.

Driver and Passenger seats
$1800 retail...$1400 today.
I'll hold off on these for a bit. Great price, just trying to get the frame and body done before getting to the interior.

Thanks.

See replies inside message above.
I'll also take a set of the billet reservoirs for $100 if you have another set.

Thanks.
Racer_X