KM647 is here! (lots of pics)

[Keithc8]

Do you have a real good heavy ground on the engine to the frame. I had this same problem and did not have the engine grounded well. It was trying to ground through the harness and blowing stuff.
Good luck, Keith

[Avmaviator]

Originally Posted by Keithc8

Do you have a real good heavy ground on the engine to the frame. I had this same problem and did not have the engine grounded well. It was trying to ground through the harness and blowing stuff.
Good luck, Keith

I just bought another grounding strap So far it is grouded via the tranny to the frame, but hopefully this extra will help. Thanks for the advice Keith.

[blykins]

Keith is right Arnaud....you can't have too many grounds. On an install, I'll ground each cylinder head to the frame rail and ground the trans too.

[Avmaviator]

Originally Posted by blykins

Keith is right Arnaud....you can't have too many grounds. On an install, I'll ground each cylinder head to the frame rail and ground the trans too.

Good idea Brent. I will do that.