NEW!!! 2 Piece 427 Carburetor Cold Air Box

[RodKnock]

Originally Posted by David Kirkham

They are $395 retail.

We will sell the next 5 of them for $300

This CC member special is good 5 units only. When 5 are sold (or two weeks maximum time passes by) the sale is OVER!

Starting NOW!

Our external unit works Tremec transmissions:

Small block with Lakewood bell housing
Small block with McLeod bell housing

FE with Lakewood bell housing
FE with McLeod bell housing

Let me know what you have.

David

I can attest to the craftsmanship and it works beautifully. The Kirkhams also modified my QT bellhousing for me to use with their setup. Very nice.

[Rottie]

David,

Can you supply the modified QT Bellhousing for the clutch set up? I assume all of the bolts from the bellhousing to block are still used? I saw another set up and the slave mounting bracket did not allow access to one of the bellhousing bolts. Sorry for all the questions, I just want to make sure that I know what I am buying. I search for a picture but could not find one, do you know where I can see the set up?

Do you recommend the QT bellhousing or a different one?

Thanks,

Peter

[David Kirkham]

Originally Posted by Rottie

David,

Can you supply the modified QT Bellhousing for the clutch set up? I assume all of the bolts from the bellhousing to block are still used? I saw another set up and the slave mounting bracket did not allow access to one of the bellhousing bolts. Sorry for all the questions, I just want to make sure that I know what I am buying. I search for a picture but could not find one, do you know where I can see the set up?

Do you recommend the QT bellhousing or a different one?

Thanks,

Peter

Peter,

What motor? FE or Small block? I'll post pics.

We like the Quick Time bell housing. They are much lighter than the Lakewood.

Yes, we can supply the bell housing. We charge $100 to modify it. The clutch fork opening has to be slightly enlarged. Then, we cut the bottom flange off so it won't catch on road kill.

David

[Rottie]

Davis,

I have a Shelby block 482 and a TKO 600. Do you recommend the Quick Time RM 6056 or RM 6056 SFI? Have you seen the 6056 SFI with the lower cover ? Please post a picture of the clutch slave and I will call you to order.

Thanks,

peter

[philminotti]

Peter, you have an email.

phil

[David Kirkham]

Originally Posted by Rottie

Davis,

I have a Shelby block 482 and a TKO 600. Do you recommend the Quick Time RM 6056 or RM 6056 SFI? Have you seen the 6056 SFI with the lower cover ? Please post a picture of the clutch slave and I will call you to order.

Thanks,

peter

Here is a link with more info that you probably want to know!

http://clubcobra.com/forums/showthre...t=80230&page=5

[David Kirkham]

Lets see if this works

[David Kirkham]

The Quick Time bell housing is a little different, but pretty close. I don't have a photo of the QT that I can find right now.

David