Bad balancer?

mr0077 · #1 (**permalink**) 05-12-2008, 09:31 AM

Tom comes highly recommended in the Vegas area, good guy and really knows his
Cobras.

bigrob · #2 (**permalink**) 05-12-2008, 10:21 AM

Quote:

Originally Posted by mr0077

Tom comes highly recommended in the Vegas area, good guy and really knows his
Cobras.

I appreciate that Ken, Thanks!!

DougR · #3 (**permalink**) 05-12-2008, 02:03 PM

It could be that the pulley is drilled off-center. That happened to me with a brand new set of March pulleys and I had to send them back for replacements.

bigrob · #4 (**permalink**) 05-12-2008, 03:12 PM

Quote:

Originally Posted by DougR

It could be that the pulley is drilled off-center. That happened to me with a brand new set of March pulleys and I had to send them back for replacements.

I just put that same possibility in a post on the BDR forum. It is very possible I suppose, and I have never really looked at the pulley since I have purchased the car. It could be this way since I got her!! I was under her a little while ago and took the belt off, checked the balancer and pulley by hand, & all seems tight. I will probably get her in to Tom's to make sure!

Thanks Doug!