427 pcv question !!

tchrome · #1 (**permalink**) 11-12-2009, 06:09 PM

you made a believer out of me. i called gessford today and i ordered the same one you have. did you run the hose from the pcv valve to the fitting in the back of the intake manifold? like in the pic you sent me. it looks like a neat and clean set up. thanks again for your help and information. thanks again and have a great thanksgiving holiday!

tony

RodgerH · #2 (**permalink**) 11-13-2009, 06:04 AM

Quote:

Originally Posted by tchrome

did you run the hose from the pcv valve to the fitting in the back of the intake manifold? like in the pic you sent me. it looks like a neat and clean set up.

Tony,
Yes, I ran the hose to a port on the back of the intake plenum, just below the carb. It was a tight bend, but I found a PCV hose at NAPA with a molded bend that fit perfectly. I usually write down p/n's for everything I buy, but no joy on this. Sorry...but your installation may be different anyway.

Happy thanksgiving to you too!

Rodger