12-30-2012, 05:18 PM
|
|
CC Member
|
|
|
Join Date: Apr 2008
Location: Near Chichester, Sussex by the sea......,
UK
Cobra Make, Engine: Crendon 427 S/C 428 FE+toploader
Posts: 668
|
|
Not Ranked
Sorry for the tardy response on this, others have probably answered already, I remember Gerry muttering something to me about original latches being hard to get hold off, but i cant remember if he makes these up or if they are OEM items - Im sure he'd be happy to talk to others. But for the record,
on my latches (which came from Gerry Hawkridge at Hawk Cars):
the base is 36.2mm diameter (approx 1.42 inches);
the external diameter of the handle shaft is 18.6mm (0.72 inches);
the distance between the two screw holes in the base is approx 27.2mm - this is only accurate to about a mm or so, as i measured this between the centre of the crosses on the cross-head screws.
Any other measurements, let me know, as I'm relaxing/working on the cobra project now before going back to salaried stress in a week or so.
Last edited by KevinW; 12-30-2012 at 05:36 PM..
|
1Likes
Threaded Mode
