Correct front turn signal lights?

mcbrad · #1 (**permalink**) 02-25-2023, 10:09 AM

I have a Superformance. Do y’all know how to take the lens off? I didn’t want to break it by turning it and it has screws on the backside. I was expecting a nut. TIA

patrickt · #2 (**permalink**) 02-25-2023, 12:51 PM

Quote:

Originally Posted by mcbrad

I have a Superformance. Do y’all know how to take the lens off? I didn’t want to break it by turning it and it has screws on the backside. I was expecting a nut. TIA

Assuming you're talking about the front signals, I have seen two types, if there are screws on the front lens then obviously remove them, but if there are raised ridges to help you turn the lens, then that's probably what it takes. Here's a diagram of the two most common types, but I suppose there could always be something that wants you to come in from behind.

mcbrad · #3 (**permalink**) 02-26-2023, 11:01 AM

Perfect! Thanks!

Blas · #4 (**permalink**) 02-26-2023, 07:08 PM

With the Superformance cars, the front indicators housings were turn signal only and the headlights has a small running light inside the glass housing. When they changed to sealed beam headlights the front running lights was relocated to the turn signal fixture. I have a Service bulletin covering how to change out the fixture if you are interested. Just email me and I’ll send it along.
Blas