427 Oil cooler housing

[mickmate]

This one?
Oil Cooler Shroud Oil Cooler Shroud [427] - $162.00 : Acton Custom Enterprises, Custom Metal for Cobras

[KevinW]

Thanks for that guys.

So my question is:
is there any metalwork to the side of the shroud, directly under the radiator itself? It looks to me on some of the pics that there is some ali sheet that goes directly under the rad, pop rivitted presumable to some lower piece of frame under the radiator.

kevin

[Dominik]

The front part of the shroud sits on top of the oil cooler, directing air in seperatetely from the radiator. The rear is mounted to the bottom of the radiator.

The big holes in Nick's pic are for the oil lines. The duct needs to be trimmed to fit to your body shape on the sides. As does the radiator shround to force all air through the radiator.

It it was any harder to explain I would add a pic... (which I don't have)

In essence: The radiator gets cold air and the oil cooler gets cold air. Either air flow won't interfere with each unit, nor can it escape to the sides or bottom.